• +86-18025364779
  • olian@szolian.com

Enterprise News

FOB BONDER

FPC Bonder

FPC bonder

FPC bonder, it may press the FPC/COF onto the Glass/PCB/FPC using ACF conductive adhesive as medium, by a certain temperature, pressure and time.

It also named FPC Bonding machine,FPC equipment,FPC heat bonder, FPC heat press machine,FPC welding machine,FPC welding tool,FPC soldering machineFPC thermal compression bonding machine,LCD flex cable repair bonding machine,FOG device,FOG tool,FOG bonding machine, wire bondingmachinethermal bonding machineheat bonding machineACF bonder.

FPC Bonder is the widely used machine in the LCD/LED/OLED, LCM/open cell/panel/screen/display , for Mobilephone/ TV /Watch/pad/notebook/touch panel/Ad Player/bank card/zebra paper/camera/…produce factories and repairing service shops all over the world.

The FPC bonder is based on the recent innovations as well as planned to peoduce and repair the arrangements of LCD, LED,OLED, TV/television, Laptop, Pad, Cell phone, Watch, Touch Panel, Ad Player, and all the flat and edge screens.

The FPC bonder may consist of HD Digital Microscope, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process.

What is FPC?

FPC IS Flexible Printed Circuit,Flexible print circuits (also variously referred to around the globe as flex circuits, flexible printed circuit boards, flex print, flexi-circuits) are members of electronic and interconnection family. They consist of a thin insulating polymer film having conductive circuit patterns affixed thereto and typically supplied with a thin polymer coating to protect the conductor circuits. The technology has been used for interconnecting electronic devices since the 1950s in one form or another. It is now one of the most important interconnection technologies in use for the manufacture of many of today’s most advanced electronic products.

In practice there are many different kinds of flexible circuits, including one metal layer, double sided, multilayer and rigid flex circuits. The circuits can be formed by etching metal foil cladding (normally of copper) from polymer bases, plating metal or printing of conductive inks among other processes. Flexible circuits may or may not have components attached. When components are attached, they are considered by some in the industry to be flexible electronic assemblies.

There are many advantages that come with using flexible circuit technology beyond the initial flex capabilities. Performance advantages, such as, dynamic flexing and increased heat dissipation allow engineers to design these circuits into applications where extreme temperatures and vibrations are common. Other advantages with using flexible circuits include less weight, increased package density, and a more integrated design.Flexible circuits can cost less than traditional assemblies because one flex assembly can replace several, single circuits.

Flex circuits also allow design engineers to utilize space three dimensionally which cuts down on the overall footprint of the circuit and saves space.

Applications of flexible circuits ranges in a variety of fields. Flexible circuits are used in cell phones, LCD televisions, antennas, and laptops. Flexible circuits have evolved and help provide durability and reliability. Flexible circuits are also used in the aviation field. Other applications of flexible circuits are in hearing aids, calculators, cameras, printers, and in satellites.

What is the FOG

FOG is a kind of use in the flat display industry, such as, LCD screen, electronic paper production process, using ACF conductive adhesive as the media through a certain temperature, pressure, time to FPC bonded on the glass.

FOG is the abbreviation FPC ON the GLASS, that is, FPC bonded ON the GLASS of a kind of process.

Shenzhen Olian design and make all kinds of FPC bonder. Welcome you visit us and OEM&OEM FPC/FOB/FOG/FOF bonding machine with us for your factory and your globe trade business.

According to different LCD/LED/OLED and different screens, there are many ACF tapes models for FPC bonder.  ACF tape is the import medium of the bonding process.

FPC bonder manufactury
shenzhen olian- FPC bonder -China FPC bonders factory/ supplers/Provider

FPC Bonder(FOB Bonder,FOF Bonder,FOG Bonder)

FPC bonder, Flexible Printed Circuit bonder,also Flex cable bonding machine , has FOG(FPC on glass ) ,FOB(FPC on PCB Board),FOF(FPC on FPC) , It have Pulse Heating Bonder and Constant Temperature Bonder. 

FOG/FOB/FOF bonding machine

FPC(FOB/FOG/FOF) bonder specifications:

  1. Model Number:F003/F006/FP003/FP006/FS003/FS006
  2. Product Name:Upper and Down Contraposition movable platform FPC Bonding Machine
  3. Suitable For:Suitable for alignment and press FPC to the LCD Panel glass or PCB or COF which attached ACF film
  4. Size Range:1~12 inch
  5. Attach Precision:±0.015mm
  6. Machine Capacity:6000pcs/day (12S/pc)
  7. Power Supply: 220V±10%,50HZ,1200W
  8. Air Supply:0.5~0.7MPa,dry air
  9. Platform Size:L90*W60 MM
  10. Platform Precision:±0.01MM
  11. Temp Range:1~350℃
  12. Time Range:1~99.9sec
  13. Product Size:W850*D800*H1460MM
  14. N.W:About200KG

*Constant temperature heating system/Pulse heating system
*Panasonic PLC Control system
*Human – Machine interface
*Automatic temperature alarm
*Press Head Level Adjustable Device
*Down/UP Contraposition HD Colorful CCD and 10.4~24 inch HD LCD
*Manual / automatic switching
*Imported electrical configuration

* apply for all the LCD,LED,ONCELL,OLED panels.

LCD bonding machine
Servo FOB/FOG bonder, OL-FS003
FPC bonding machine
2 stations Up and down alignment FPC bonder, OL-F006
COF pre-bonder
Pulse heating Doul Stations FOG FOB FOF COF bonder, OL-FP003
FOG/COF bonder
Pulse Heating single station FOG/FOB/FOF/COF Bonder, OL-FDP006

Semi Automatic LCM produce line

LCD bonding machine
High speed produce line 7 sets bonders

Semi Automatic LCM Making produce include: ACF attaching bonder ,COG Bonder(COG pre-bonder, COG final-bonder ), FPC(FOG) bonder, as below:

ACF semi-auto Bonders
ACF semi-auto Bonders

Full automatic FPC bonder

Full automatic FPC(FOG) bonder, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCM full automatic produce machine

LCM full automatic bonder include all the process of the COG and FOG bonding : the LCD loading,LCD cleaning, IC loading, IC cleaning,ACF attaching on the glass, IC pre-bonding, IC bonding cheking, and IC main-bonding processes. then the ACF attaching for FPC, FPC loading, FPC bonding on the glass and output to testing…

We design and make the standard FPC/FOG/COG/COF/ACF Bonders and customized FPC bonder for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

All the FPC bonders ,welcome you visit us-Shenzhen Olian(LCM Equipments factory solution provider/supplier/manufactury)

FOG Bonder
FPC Bonder
Shenzhen Olian FPC bonder manufactory
FPC bonder
Welcome you visit us -Shenzhen Olian-IC/FPC bonder manufactory
Please follow and like us:
COG Bonder

COG Bonder

COG Bonder/COF Bonder

COG bonder, also named COG (Chip on glass) machine,Chip ic bonding machine, COF(chip on film) bonder ,COG heat bonder, COG bonding machine, Chip IC heat press machine, Chip on glass bonding machine.It is widely used in the LCD/LED/OLED, LCM/panel/screen/display , for Mobilephone/Watch/pad/notebook/touch panel/Ad Player/bank card/camera/ and all the flat and edge screens. for produce factories and repairing service shops all over the world.

The COG machine may consist of HD Digital Microscope and control system, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process. The bonding press head may press the IC/COF onto the Glass/PCB/FPC using ACF conductive adhesive as medium, by a certain temperature, pressure and time.

According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the import medium of the bonding process.

Shenzhen Olian is the professional COG bonder manufactury ,we are the LCM Equipment factory solution provider.

COG bonder manufactury
shenzhen olian- COG bonder -China COG bonders factory/ supplers/Provider

COG Bonder/ COF Bonder

The machine has Pre-Bonder and Main-Bonder . They are all constant temperature machines. it maybe have single station bonder ,double stations , three stations, and maybe four stations bonder.

COG/COF Pre-Bonder

Features:

*Suitable for multi variety small batch production

*Constant temperature heating system

*Panasonic PLC Control system

*FAST Visual processing system

*Imported Japanese CCD Automatic Contraposition Configuration

*Manual / automatic switching

*Imported electrical configuration

Specification:

COG Pre-Bonder /COF Pre-Bonder, OL-C003B
COG Bonder
COG Pre-Bonder, OL-C008

COG bonder
OL-C006

Model: OL-C003B/C005/C006

Product Name: Semi-Automatic Mid/High-speed COG/COF Pre-bonding machine

Suitable For: Suitable for IC bonded to the LCD which attached ACF

Size Range: 1~7 inch

Attach Precision: ±2.5UM

IC Size: L:2~40mm,W:0.8~3mm

Machine Capacity: 650pcs/H–1000pcs/H

Power Supply: 220V±10%,50HZ,1000W/1200W

Air Supply: 0.5~0.7MPa,dry air

Platform Size: 140*100MM

Platform Precision: ±0.01MM

Pressure Head Size: 40*2MM Customizable

Temp Range: 1~300℃

Time Range: 1~99.9

N.W: About 300KG/350KG

COG/COF Main-Bonder

Features:

*PID Control Constant Temp Heating System,Automatic temperature compensation to ensure that the temperature of hot pressing is stable.

*Panasonic PLC Control system.

*Use high precision low-friction cylinder control pressure to ensure the accuracy of pressure control.

*High steel structure set, dual ceramic indenter configuration, to ensure the stability of the equipment.

*Imported electrical configuration,

*For OLED high-end products,high quality,high successful rate。

Specification:

OL-C006 Triple station semi-auto high speed COG Main-Bonder

Model: CM006

Product Name: 1-12 inch Triple Stations Semi-Automatic High-speed COG main-bonding machine

Suitable For: Suitable for IC bonded to the LCD which attached ACF

Size Range: 1~12 inch

Attach Precision: ±4.5UM

IC Size: L:2~40mm,W:0.8~3mm

Machine Capacity: 1100pcs/H

Power Supply: 220V±10%,50HZ,2000W

Air Supply: 0.5~0.7MPa,dry air

Platform Size: 150*100MM

Platform Precision: ±0.01MM

Pressure Head Size: 45*5MM Customizable

Temp Range: 1~400℃

Time Range: 1~99.9

Product Size:L1025*W750*H1400 MM

N.W: About 350KG

LCD bonding machine
Servo COG/COF Final-Bonder , OL-C012
OL-C008 Double Stations Mid-speed Servo COG machine 

Model: OL-C008/OL-C012

Product Name: 1-12 inch Double Stations Semi-Automatic Mid-speed Servo COG main-bonding machine

Suitable For: Suitable for IC bonded to the LCD which attached ACF

Size Range: 1~12 inch

Attach Precision: ±4.5UM

IC Size: L:2~40mm,W:0.8~3mm

Machine Capacity: 600pcs/H

Power Supply: 220V±10%,50HZ,1200W

Air Supply: 0.5~0.7MPa,dry air

Platform Size: 150*100MM

Platform Precision: ±0.01MM

Pressure Head Size: 45*5MM Customizable

Temp Range: 1~400℃

Time Range: 1~99.9

Product Size:L640*W700*H1320MM

Full automatic COG bonder

Full automatic COG bonder, include all the glass loading/glass cleaning/IC Loading/ACF pre-attaching/COG pre-bonder/COG main-bonder /COG glass output.

full auto COG bonder
1~7inch Full Automatic COG bonder

Features:

*Constant temperature heating system

*Panasonic PLC Control system

*Human – Machine interface

*Imported electrical configuration

*High Precision contraposition system

*Include the glass loading,glass cleaning,IC loading,ACF pre-attaching,COG pre-bonding,COG main-bonding ,COG output processes,it is COG processes all in one machine.

Specification:

Model: FAC001

Product Name: 1~7inch Full Automatic COG bonder

Suitable For: Suitable for IC Bonding to the LCD, ACF attach, IC preload and pre-bonding, main-bonding,output, completed in one machine.

Size Range: 1~7 inch

Attach Precision: ±2.5UM

IC Size: L:2~40mm,W:0.8~3mm

Machine Capacity: 1000pcs/H

Power Supply: 220V±10%,50HZ,5000W

Air Supply: 0.5~0.7MPa,dry air

Platform Size: 150*100MM

Platform Precision: ±0.01MM

Pressure Head Size: 45*5MM Customizable

Temp Range: 1~300℃

Time Range: 1~99.9

Product Size: W1500*D2300*H1700MM

Semi Automatic LCM produce line

Semi Automatic LCM Making produce include: ACF attaching  ,COG pre-bonding, COG final-bonding , FOG(FOB) bonding, as below:

LCD bonding machine
High speed produce line 7 sets bonders
ACF semi-auto Bonders
ACF semi-auto Bonders

Full Automatic FOG bonder

Full automatic FOG bonder, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCM full automatic Bonder: ACF attaching/COG Bonding/FOG bonding

LCM full automatic bonder include all the process of the COG and FOG bonding : the LCD loading,LCD cleaning, IC loading, IC cleaning,ACF attaching on the glass, IC pre-bonding, IC bonding cheking, and IC main-bonding processes. then the ACF attaching for FPC, FPC loading, FPC bonding on the glass and output to testing…

We design and make the standard COG/COF/ACF Bonders and customized ACF bonder for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

COF bonder for TV Repairing,LCD bonder

COF bonder
COF bonder

COF bonder, also name TAB bonderACF bonderOLB Bonder Chip on Film bonder. COF(Chip on Film, Chip on Flex).COF bonder is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonder also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonder for TV Repairing is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonder for TV Repairing accessories

Our COF bonder and all the accessories list for TV/laptop panel repairing as below:

COF bonder

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Please contact us feel free to  purchase the COF bonder for TV Repairing accessories.

COF bonder
COF bonder and accessories

Welcome to buy the COF bonder for TV Repairing and all the COF bonder accessories.

COF Bonder for cellphone

COF bonders for full screen /edge screen/OLED screen mobilephone

COF bonder

COF Bonder for cellphone – ACF attaching bonder

ACF bonder

COF Bonder for cellphone – COF Pre-bonder

COG bonder
cof bonder
cof bonder
COF Bonder
COF pre-bonder

COF Bonder for cellphone – COF Final-bonder

COG bonder

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our COF bonder for cellphones.

ic bonder

All the ACF/COG/COF/COB/FOG/FOB/FOF/OLB/TAB/PCB/FPC/TCP/ bonders ,welcome you visit us-Shenzhen Olian(LCM Equipments factory solution provider/supplier/manufactury)

cog bonder
COG bonder
Shenzhen Olian ACF/COG/COF/COB/FOG/FOB/OLB/FOF/TAB/OGS/PCB/FPC bonder manufactory

Shenzhen Olian ACF/COG/COF/COB/FOG/FOB/OLB/FOF/TAB/OGS/PCB/FPC bonder manufactory. Welcome you to be our partner and dealers all over the world.

Please follow and like us:
pulse heat bonding machine

ACF Bonder

ACF bonder

ACF bonder, also named ACF machine, ACF equipment, ACF heat bonder, ACF tape bonding machine, ACF film bonder, ACF heat press machine, ACF device, ACF tool, ACF bonding machine.It is the widely used machine in the LCD/LED/OLED, LCM/open cell/panel/screen/display , for Mobilephone/ TV /Watch/pad/notebook/touch panel/Ad Player/bank card/zebra paper/camera/…produce factories and repairing service shops all over the world.

The ACF bonder is based on the recent innovations as well as planned to peoduce and repair the arrangements of LCD, LED,OLED, TV/television, Laptop, Pad, Cell phone, Watch, Touch Panel, Ad Player, and all the flat and edge screens.

The ACF bonder may consist of HD Digital Microscope, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process. The bonding press head may press the IC/FPC/COF onto the Glass/PCB/FPC using ACF conductive adhesive as medium, by a certain temperature, pressure and time.

According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the import medium of the bonding process.

ACF bonder manufactury
shenzhen olian- ACF bonder -China ACF bonders factory/ supplers/Provider

ACF bonder for mobilephone

According to the different bonding materials, the ACF bonder can be divided into different Bonders.

COG Bonder, COF Bonder

COG Pre-Bonder /COF Pre-Bonder, OL-C003B
COG Bonder
COG Pre-Bonder, OL-C008
LCD bonding machine
Servo COG/COF Final-Bonder , OL-C012
Servo COG main-bonder,OL-C008
COG final-bonder
COG final-bonder,OL-C006

COG/COF bonder, also name IC bonder, Chips bonder, COG(Chip on glass) bonder, COF(chip on film) bonder, it is bonding the Chip IC on the glass, using ACF conductive adhesive as medium, by a certain temperature, pressure, time, driver IC will be bonded onto the glass. COG/COF bonder has COG/COF Pre-Bonder and COG/COF Final-Bonder(COG/COF Main bonder). They are all constant temperature machines. it maybe have single station ,double stations, three stations, and maybe four stations COG/COF bonder.

FOG Bonder,FOB Bonder,FOF Bonder,COF Bonder

LCD bonding machine
Servo FOB/FOG bonder, OL-FS003
FPC bonding machine
2 stations Up and down alignment FPC bonder, OL-F006
COF pre-bonder
Pulse heating Doul Stations FOG FOB FOF COF bonder, OL-FP003
FOG/COF bonder
Pulse Heating single station FOG/FOB/FOF/COF Bonder, OL-FDP006

FOG bonder, also name FOB bonderFPC bonderFlex cable bonder .FOG(FPC on glass )or FOB(FPC on PCB Board), FOF(FPC on FPC), also COF on Glass bonder, COF on PCB board bonder, COF on film bonder. It have Pulse Heating Bonder and Constant Temperature Bonder.

ACF attaching bonder

LCD bonding machine
ACF-Attaching-bonder OL-A003

ACF attaching bonder which is attaching the ACF tape on the Glass/Board/FPC/COF before bonding. it also name ACF machine, ACF attachment machine, ACF Attached machine , ACF bonding machine , ACF pre-paste , ACF equipment , ACF pre-paste machines , ACF pre- affixed equipment, ACF single station machine , ACF multi-station machines and so on.  The ACF attaching bonder,

Semi automatic LCM produce line

LCD bonding machine
High speed produce line 7 sets bonders

Semi Automatic LCM Making produce include: ACF attaching bonder ,COG pre-bonder, COG final-bonder , FOG(FOB) bonder, as below:

ACF semi-auto Bonders
ACF semi-auto Bonders

Full automatic COG bonder

full auto COG bonding machine

Full automatic COG bonder, it include the LCD cleaning, IC loading, ACF attaching on the glass, IC pre-bonding, and IC main-bonding processes.

Full automatic FOG bonder

Full automatic FOG bonder, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCM full automatic produce machine

LCM full automatic produce line include all the process of the COG and FOG bonding.

We design and make the standard ACF Bonders and customized acf bonder for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

COF bonder for TV Repairing,LCD bonder

COF bonder, also name TAB bonderACF bonderOLB Bonder Chip on Film bonder. COF(Chip on Film, Chip on Flex).COF bonder is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonder also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonder for TV Repairing is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonder for TV Repairing accessories

Our COF bonder and all the accessories list for TV/laptop panel repairing as below:

COF bonding machine

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Please contact us feel free to  purchase the COF bonding machine accessories.

Buy machine, send all the accessories free.

1COF bonding machine  
2ACF  AC-7206-18  1.5*50M  Glass side ACF胶带
3ACF AC-2056R-35  2.0*50M PCB side ACF胶带
4ACF Removing Liquid  G-450  1000ML ACF去除液 G450
5Acetone Liquid BT-H1-500ML  丙酮
6Hitachi Blue Glue  100ML 蓝色胶水
7Fuji Silicone  50M 硅胶皮
8Teflon  50M 铁氟龙
9Alcohol  酒精
10Heating Solder Iron 30W +T-Type Soldering Tips T型烙铁+硅胶条
11Removing Wind Station Hot Air Gun 825+Fan 除风站 热风枪
12Optical Microscope 显微镜
13TAB Cutter   COF切刀
14Correction table   校正表
15LVDS                     LVDS接头
16LCD Test Board   LCD测试板
17Allen Key 六角扳手
18Air Compressor  OTS550 空压机
19Static Wipe Cloth 静电擦拭布
20Cotton swabs 棉签
21Handheld Magnifier 手持放大镜
22Precision Tweezers 精密镊子
23Nano Sponge 纳米海绵
24quatz bar spare one 备用石英条
25Alcohol bottles 空酒精瓶
COF bonding machine accessories

COF bonding machine accessories

Welcome to buy the COF bonder for TV Repairing and all the COF bonding machine accessories.

COF Bonder for cellphone

COF bonders for full screen /edge screen/OLED screen mobilephone

COF Bonder for cellphoneACF attaching bonder

ACF-ATTACHING-MACHINE

COF Bonder for cellphone – COF Pre-bonder

FPC bonding machine


COF pre-bonder

COF Bonder for cellphone – COF Final-bonder

ACF bonding machine|COF Bonding machine|TAB bonding machine|OLB bonding machine|PCB bonding machine|FPC bonding machine|COG bonding machine|FOG bonding machine|

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our COF bonder for cellphones.

OLED-BONDING-machine

All the ACF bonders ,welcome you visit us-Shenzhen Olian(LCM Equipments factory solution provider/supplier/manufactury)

LCD Bonding machine
Shenzhen Olian ACF bonder manufactory
Please follow and like us:

OLED panel Bonding Machine

OLED panel Bonding Machine

OLED panel bonding machine, is for AMOLED panel produce and repair machine for TV/Cell phone/Watch/other AMOLED products.  bonding the COFs on the OLED panel and flexible FPCs.


What is OLED?

ACF bonding machine | COF Bonding machine | TAB bonding machine | OLB bonding machine | PCB bonding machine | FPC bonding machine | COG bonding machine | FOG bonding machine

An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphoneshandheld game consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row (and line) in the display is controlled sequentially, one by one,whereas AMOLED control uses a thin-film transistor backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight.

OLED Advantages

The different manufacturing process of OLEDs has several advantages over flat panel displays made with LCD technology.

Lower cost in the future

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing, theoretically making them cheaper to produce than LCD or plasma displays. However, fabrication of the OLED substrate is currently more costly than that of a TFT LCD. Roll-to-roll vapor-deposition methods for organic devices do allow mass production of thousands of devices per minute for minimal cost; however, this technique also induces problems: devices with multiple layers can be challenging to make because of registration – lining up the different printed layers to the required degree of accuracy.

Lightweight and flexible plastic substrates

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)can be used, the displays may be produced inexpensively. Furthermore, plastic substrates are shatter-resistant, unlike the glass displays used in LCD devices.

Better picture quality

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

Better power efficiency and thickness

LCDs filter the light emitted from a backlight, allowing a small fraction of light through. Thus, they cannot show true black. However, an inactive OLED element does not produce light or consume power, allowing true blacks. Removing the backlight also makes OLEDs lighter because some substrates are not needed. When looking at top-emitting OLEDs, thickness also plays a role when talking about index match layers (IMLs). Emission intensity is enhanced when the IML thickness is 1.3–2.5 nm. The refractive value and the matching of the optical IMLs property, including the device structure parameters, also enhance the emission intensity at these thicknesses.

Response time

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1 msfor their fastest color transition, and are capable of refresh frequencies as high as 240 Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,putting conservative estimates at under 10 μs (0.01 ms), which could theoretically accommodate refresh frequencies approaching 100 kHz (100,000 Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

Shenzhen Olian OLED panel bonding machine

Shenzhen Olian Automatic Equipment have the OLED bonding machine for AMOLED screens.

if you need the machine for the OLED screen repairing, please contact us .

OLED panel bonding machine- ACF attaching machine

ACF-ATTACHING-MACHINE

OLED panel bonding machine- COF Pre-bonding machine

FPC bonding machine


OLED panel bonding machine- COF Final-bonding machine

ACF bonding machine|COF Bonding machine|TAB bonding machine|OLB bonding machine|PCB bonding machine|FPC bonding machine|COG bonding machine|FOG bonding machine|

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our OLED bonding machine.

OLED-BONDING-machine

OLED-panel-bonding-machine

All the bonding machines ,welcome you visit us-Shenzhen Olian(Professional in design&making all kinds of bonding machines)

Please follow and like us:

Bonding machine parts

Bonding machine parts

In the bonding machine, we need to use many kinds of parts,

Bonding Machine Parts Photos

bonding machine parts
bonding machine parts
bonding machine parts
bonding machine parts
bonding machine parts
bonding-machine-working-videos
bonding-machine-working-videos

All kinds of parts assembled to the bonding machines.

We are design and make all the machines, we select and test all the parts,and use the best parts for our machines.

if you need any parts ,please contact us..

About Us-Olian

Shenzhen Olian Automatic Equipment Co., Ltd (Olian) is a high-tech manufacturer established in 2008, professional specialized in R&D, manufacturing and sales of LCD/LED/OLED module automatic bonding machines and other equipments

Olian insist on the product concept of ” High quality, High efficiency”, have successfully developed standard and custom products:

Olian Design&Make the best and latest LCD/LED/OLED COG/FOG/FOB/FOF/FPC/OLB/ACF/COF/TAB Bonding Machine for TV/Cell phone/Laptop/Pad/Watch/Touch Screens. All the repairing and produce automatic machines/equipements/tools,and all the parts,accessories.

1. LCD/LED/OLED module machines:

Large, medium and small size COG machine, Semi-automatic COG machine, Automatic COG machine, ACF attach machine, IC bonding machine, COG pre-bonding machine, COG main-bonding machine, FOB bonding machine, FOG bonding machine, FPC bonding machine, SMT machine, Tear film machine, detection device, PLASMA, LCD clearing machine;

Auxiliary equipment: IC disassembling machine, ACF split machine, Molybdenum wire machine, Heating platform, Manual or pneumatic test stand, etc;

2.Capacitive screen Touch screen device:

G + F laminating machine, G + G vacuum laminating machine, Touch screen ACF attach machine, Touch screen FOG, Hot press machine, PETOCA laminating machine, F + F, Automatic laminating machine, TP protective film laminating machine

3.Large size LCD/LED/OLED Equipments:

TV repair machines:12-100inch COF bonding machine, LCD laser repair machine, LCD polarizer film repair machine,12-100 inch ACF attaching machine, COF bonding machine, PCB bonding machine, COF Pre-bonding machine, OLB Bonding machine;

4. Cell phone LCD/OLED repair machines:

LCD separate machine, LCD film machine, LCD laminating machine, LCD bubble remove machine, and other tools.

5. Accessories ,Parts and maintenance of the LCD module and TP equipment:

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning sponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC ,all kinds of bonding press head( SU440C bonding head, Tungsten steel bonding head, Titanium alloy press head) production and maintenance, grinding or design and others,

Olian welcome customers to visit our company for technical exchange and business negotiation. Olian will do the best to provide you with high quality equipment and satisfactory service. Olian determined to become the leading brands of the smart automatic equipment bonding machine industry.

Olian Welcome agents and resellers from around the world,

Welcome OEM&ODM for you.

www.szoulian.com

Please follow and like us:
ACF bonding process

ACF bonding process

ACF bonding process

ACF bonding process ,is the process of Chip ic/COF ic/FPC bonded to the LCD(Glass)/PCB/Film/FPC/ ,use the ACF tape as the medium connecting materials,use the hot bar/bonding head as the source of the heat and pressure,use the tooling as the holder,and the silicone rubber or teflon as the Cushioning material, all the ACF bonding process finished by the ACF bonding equipments.

ACF tape has little conductive particles in the conductive lines of the tape. 

acf bonding process

During ACF bonding, a combination of heat & pressure is applied on to chip (FPC/IC) for an appropriate time.

Conductive particles (each 3~30um) are compressed between IC and substrate (glass / PCB) while insulating materials pushed away.

This allows the compressed Ni-Au layer on the particles to conduct electricity between the IC and the substrates (z-axis).

The insulated particles are distributed with a minimum chance of electrical shorting in the x-axis and y-axis.

As the epoxy cures and conductive particles are trapped into permanent compressed form.

The compressed particles, by its elastic nature, are constantly pushing outwards to maintain good electrical conductivity under different environmental conditions. 

This process is what produces the connection between the ACF tape and the components.  Advanced Integrated Technologies is equipped to assist you with your ACF bonding process.

ACF bonding process sorts and conditions:

acf bonding process
ACF bonding process

According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the important medium of the ACF bonding process.

ACF Tape/ACF Film-ACF bonding process materials

ACF TAPE

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

-Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

-Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF tape/ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

Some ACF models:

Model(Hitachi)Process typeFor Glass
AC-823CY  W1.2mm  L100mCOG Low TempThin Glass
AC-823CY  W1.5mm  L100mCOG Low TempThin Glass
AC-823CY  W2.0mm  L100mCOG Low TempThin Glass
AC-8412KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-832L  W1.2mm  L100mCOG Low TempThin Glass
AC-832L  W1.5mm  L100mCOG Low TempThin Glass
AC-832L W2.0mm  L100mCOG Low TempThin Glass
AC-832L W2.5mm  L100mCOG Low TempThin Glass
AC-8622KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-7813KM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W2.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W2.0mm  L100mFOG Low TempCommon Glass
MF-331-25 W2.0mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.5mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.2mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.0mm  L50mFOG Low TempFor Touch Screen
AC-4255KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-3514-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7206U-18  W1.0mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.2mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.5mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W2.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.5mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W2.0mm  L50mFOG Normal TempCommon Glass
AC-9851YM-35  W1.5mm  L50mFOG Low TempCommon Glass
AC-9851YM-35  W2.0mm  L50mFOG Low TempCommon Glass
AC-896C  W1.5mm  L100mCOG Low TempThin Glass
Model(Sony)Process typeFor Glass
CP6920F3  W3.5mm  L50m COG Low TempCommon Glass
CP6920F3  W3.0mm  L50m COG Low TempCommon Glass
CP6920F3  W2.0mm  L50mCOG Low TempCommon Glass
CP6920F3  W1.5mm  L50m  COG Low TempCommon Glass
CP6920F3  W1.2mm  L50m  COG Low TempCommon Glass
CP34531  W1.5mm  L100m  COG Low TempThin Glass
CP34531  W2.0mm  L100m  COG Low TempThin Glass
CP36531  W1.5mm  L100m  COG Low TempThin Glass
CP36531  W2.0mm  L100m  COG Low TempThin Glass
CP35231  W1.5mm  L100m  COG Low TempThin Glass
CP35231  W2.0mm  L100m  COG Low TempThin Glass
CP36931  W1.5mm  L100m  COG Low TempThin Glass
CP36931  W2.0mm  L100m  COG Low TempThin Glass
CP33731  W1.5mm  L100m  COG Low TempThin Glass
CP33731  W2.0mm  L100m  COG Low TempThin Glass
CP31831  W1.5mm  L100m  COG Low TempThin Glass
CP31831  W2.0mm  L100m  COG Low TempThin Glass
CP1220  W1.0mm  L100m  FOG Low TempCommon Glass
CP1220  W1.2mm  L100m  FOG Low TempCommon Glass
CP1220  W1.5mm  L100m  FOG Low TempCommon Glass
CP1220  W2.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.2mm  L100m  FOG Low TempCommon Glass
CP13941  W1.5mm  L100m  FOG Low TempCommon Glass
CP13941  W2.0mm  L100m  FOG Low TempCommon Glass
CP6920F W3.5mm  L50m COG Low TempCommon Glass
CP6920F W3.0mm  L50m COG Low TempCommon Glass
CP6920F W2.0mm  L50mCOG Low TempCommon Glass
CP6920F W1.5mm  L50m  COG Low TempCommon Glass
CP6920F W1.2mm  L50m  COG Low TempCommon Glass
CP920  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP920  W2.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP923  W2.0mm  L100m  FOG Low TempFor Touch Screen
AC-7813KM specification

ACF tape data sheet(for example:7206U/2056R)

ACF hot bar/ACF bonding head-ACF bonding process heat and pressure source

The source for heat and pressure in ACF bonding process is most often a hot bar/thermode/bonding head/bonding cutter.

Hot bar bonding systems are designed to heat the hot bar to a specific temperature using low voltage electricity, which temperature is fed back to the controller via a thermocouple. 

Tooling is designed to hold the components and position the ACF tape to line up correctly with the conductive pads on the PCB or other component. 

The hot bar is then brought into contact with the ACF film over the top of the bonding pad, heated to the bonding temperature, and held for a specified time. 


Tell us which products you want to bonding ,then we can suggest you the right ACF bonding equipments for you ..

ACF Bonding Equipment Applications

ACF bonding equipment has been used in glass display applications for many years.  It has recently become widely used in COF, COB,COG,FOG,FOB,FOF areas.  

ACF bonding equipment

Industries that use this technology most are the mobile phone manufacturing, automotive industry, and LCD production, mobile computers, TV manufacturing, open cell panels factories, touch panel ,AD shower, Watch, Pad… factories. and  many Labs who researching in the LCD/LED/OLED/MICRO LED/MINI LED displays industries.

  • TAB Bonding (TCP-PCB / TCP-LCD)
  • COG Bonding (IC-LCD)
  • COB Bonding (IC-PCB)
  • COF Bonding (COF-LCD/PCB)
  • FOG Bonding(FPC-LCD)
  • FOB Bonding(FPC-PCB)
  • FOF Bonding(FPC-FPC)
  • Plasma Display (FPC-PDP)
  • Flip Chip Package
  • ……

ACF Bonding equipment Features

  • Heat cure
  • Fast bonding time
  • High adhesion to plastic PET,COF & FPC, substrate
  • Excellent thermal stability
  • Good contact resistance for reliability
  • Good corrosion resistance
  • Excellent chemical resistance
  • Good for wide bonding temperature range
  • Replaces solder for lead-free solution

Silicon rubber and Teflon

Teflon Tape ( Teflon cushion)

Similar to Silicone rubber, Teflon tape is often used to provide evenly distributed pressure and temperature on the ACF bonding process.

Features of Teflon Tape :

1. Superior chemical resistance – hardly affected by acids and alkalis.

2. Excellent electrical properties, including little dielectric loss, high insulation resistance and breakdown voltage.

3. Extremely high volume resistivity and remain stable over a wide range of temperature.

4. Continuous use in a wide range of temperature from -100degC to +260degC

5. Lowest friction cofficient among all solid materials and excellent self-lubricating ability.

6. Non-adhesiveness and mold releasing property

7. Excellent weather and moisture resistance

8. Superior flame resistance

Shenzhen olian is a professional ACF bonding equipment design&making factory, We know all the ACF bonding process, we also offer all the bonding machine accessories and parts. Welcome you visit us .

Wechat/whatsapp:+86 18025364779, QQ:2307972393, https://bonding-machine.com

ACF Bonding equipment
Please follow and like us:

ACF bonding head/ACF bonder

ACF bonding head

ACF bonding head also name:ACF/TAB/COF/COG/FOG/FPC/FOF Bonding machine press head /bonding tip/welding heads/ Hot Bar / soldering heads / heater tip / heater tools/ thermode for hot bar / ACF Bonding machine cutter head/bonding cutter/heat cutter……

Panasonic FOG press head

It have pulse heating and constant temperature bonding head.

Materials:

Normal materials:

-SUS440C steel(440C不锈钢)

-Tungsten steel(钨钢,钨钢(硬质合金)具有硬度高、耐磨、强度和韧性较好、耐热、耐腐蚀等一系列优良性能,特别是它的高硬度和耐磨性,即使在500℃的温度下也基本保持不变,在1000℃时仍有很高的硬度 )

-Titanium alloy (normal used in pulse heating bonding machine), (钛合金,脉冲压头一般用钛合金制作)

-Ceramic (陶瓷,一般用在COG压头)

-Brass (黄铜)

-and others.

Size:

It will be different sizes for different products, such as TV Panel/cell phone/Touch panel/camera/watch/ Heat Seal Paper/, every products have the different shapes and sizes, so we need to make the customized bonding head according to your products.

Applications:

ACF Bonding head has for many years, been used in glass display applications. Recently, it is also becoming widely used in TAB,COG,FOG,FOB,FOF,COF,COB areas.

– TAB Bonding (TCP-PCB / TCP-LCD)

– COG Bonding (IC-LCD)

– COB Bonding (IC-PCB)

– COF Bonding (COF-LCD/PCB)

– FOG Bonding(FPC-LCD)

– FOB Bonding(FPC-PCB)

– FOF Bonding(FPC-FPC)

– Plasma Display (FPC-PDP)

– Flip Chip Package

– ……

Features:

-Heat cure

-Fast bonding time

-High adhesion to plastic PET,COF & FPC, substrate

-Excellent thermal stability

-Good contact resistance for reliability

-Good corrosion resistance

-Excellent chemical resistance

-Good for wide bonding temperature range

-Replaces solder for lead-free solution

Photos:

CRYSTAL
ACF bonding head
acf bonding head
ACF bonding head for TV Repairing COF bonding machine

Shenzhen Olian Automatci Equipment make all the ACF bonding machine heads/hot bar/welding tips……

Olian,is a high-tech enterprise established in 2008, specialized in R&D, manufacturing and sales of LCD/LED/OLED module automatic bonding machine (COG/FOG/ FOB/ACF/COF/OLB/TAB/FOF bonding machine)and all the parts,accessories(ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.)

Welcome you visit us.

Tel:+86-755-23209022 Fax:+86-755-23209033

QQ:2307972393

Mobilephone/WeChat:+86 18025364779

WhatsApp/Line: +86 18025364779

E-mail:olian@szolian.com

Address: Floor 5,Building D, Sogood Science Park, Aviation Road, Sanwei Village, Xixiang Town, Bao’an District, Shenzhen, China

Please follow and like us:
COF bonding machine

TAB bonding machine

TAB BONDING MACHINE

TAB bonding machine ,upto 100inch panel doubel press head single screen COF bonding machine/ACF bonding machine/TAB bonding machine

Tab bonding machine

Welcome to be our sales and service agents /dealers in your country.

TAB bonding machine/COF bonding machine/ACF bonding machine

TAB bonding machine, also name COF bonding machineACF bonding machineOLB Bonding machineChip on Film bonding machine. COF(Chip on Film, Chip on Flex).COF bonding machine is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonding machine also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonding machine is Pulse heating bonding machine with Titanium alloy press bonding head.

Our TAB bonding machine and all the accessories list for TV/laptop panel repairing as below:

TAB bonding machine and all the accessories

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Wechat/Whatsapp:+8618025364779

bonding machines
tab bonding machine

Machine Operating Video in Youtube:

SPEC Download:

OL-TVCBM-1285-DH-SH-SS- SPEC.pdf

TAB bonding machine Introduction

TAB bonding machine is a widely used machine all over the world. This bonding machine is based on the recent innovations as well as planned to repair the arrangements of LCD, LED, and television. This bonding machine may consist of has two Digital Microscope, and also has a Digital Pressure Gauge. The ACF bonding machine consists of vacuum generator which may help to hold the panel during the bonding process. It may also provide the quick as well as easy solutions for various mobile problems. COF (TAB Bonding Machine ) is fast as well as it is very easy to access this bonding machine. This bonding machine is able to provide high accuracy repair apparatus for repair different size of the LED or LCD screen as well as LCD Panel. COF bonding machine also consists a process of repairing the technical equipment in an easy way.

We provide the various sizes and types of this machine, as well as all the services, are available if any defect may occur in the machine. Anisotropic conductive film (ACF) bonding machine commonly use in connectivity with electrical and mechanical connections from electronics driver to glass substrate of the LCD/LED/TV. During the ACF bonding process, heat and pressure are applied via a thermode (or hot bar) on to the ACF film or other component that is sandwiching the ACF film.

TAB bonding machinehelps to repair LED,LCD,TV, of lining issues on panel . Ultimate solutions of bonding of COF (COF Bonding Machine)with fast and easy to operate bonding machine. it is a kind of high precision repair equipment for repair various size LED/LCD screen/LCD Panel.

TAB bonding machine OL-1285-DH/SH-SS Specification—– 

Single Head Manual platform ACF/TAB/COF Bonding machinefor TV repair,Television repair,Panel repair,screen repair.

Machine Model Number:

1) Machine Model Number: OL-1285-DH/SH-SS   (Single Head &Double head)

2) Device Description :Screen Repair machine / LCD Bonding machine

3) Device Uses :FPC、 COF、TAB、 LCD Panel and PCB combination bonding

4) Applicable LCD panel specifications :12″-100″(65″,85″100″ options)

5) Applicable LCD panel thickness :0.3MM-1.1MM[Single glass]

6) Bonding IC number :Multiple / Panel   Can be set

7) Bind  direction :X or Y Unidirection

8) Bonding IC size :Replaceable blade according to IC specifications (The original machine is equipped45X1.5X10)

9) Device processing time :TFT,3.8S/chip

10) Production Beats :TAB,100 pcs/H

11) TAB Bonding machine Accuracy :Within ± 1.5μm  (support 4K screen)

12) Highest positioning accuracy setting :±0.5μm (Currently domestic the highest index)

13) Equipment requirements the work environment :Clean, No dust, Clean room

14) Supply Pressure :0.5~0.7Mpa  (Dry air source)

15) Power Supply :AC 220V±10%,50HZ,3500W

Machine Parts Model Informations:

16) Cylinder Device :Japan SMC original thin cylinder  MXS20-75/MXS20-100

17) Heating Type :Pulse (rapid heating / cooling and auxiliary cooling function)

18) PID Temperature Control System :Brand: YUDIAN  (516 model)

Adjustable heating curve  Precision PID self-tuning type

The peak temperature : within +/- 3 degrees Celsius

Room temperature time to 180 degrees the response time within 2-3 seconds

19) TAB bonding machine Hot pressing head :

Materials: Japan Titanium

origin: United States

Plane precision (hot press side) :0.001mm

Plane thickness 0.5  (Reserved 3 times grinding)

20) Thermocouple Type :K type   Original US OMEGA wire

21) Industrial control units / Programmer :Import Panasonic PLC FX-C40T

22) Image unit :

Panasonic image processing system

COF counterpoint: down counterpoint

PCB counterpoint : UP counterpoint

Number of lenses : 4

Microscopy: 30-120 Continuous zoom

COF Display: 19-inch HD 1PCS

PCB counterpoint the display : same (Can be installed )

Upper light source : have

Down light source : have

23)COF trimming unit :

Origin: Taiwan

Rail Type: U-rail (2056 high)

Accuracy : 0.01

Adjustable direction :X/Y/R

R Itinerary : Coarse 360 degrees, fine tuning +/- 5 degrees

24)COF Fixture : COF mechanical clamping type, Z tilt radius  micrometer trimming

25) Lens spinner unit :

Control mode: X / Y / Z micrometer control

Focus Adjustment: Manually adjust the focus

26) Position detection : None

27) Silicone / Teflon :Manual switching position

28) LCD stage (platform) :Manual sliding or fixed optional ,automatic stage can be customized

29) Alarm device :Pressure abnormal/ temperature anomalies / thermocouple abnormal / action abnormal

30) Hot press head counterpoint :Cylinder stop can be set at any position in the vertical direction

31) COF bonding machine Control mode :Touch screen + button operation   Using Taiwan’s Wei Lun touch screen dual-core

32) Parameter setting :According to the need to set up Store multiple sets of hot pressing parameters

Machine Electrical parameter:

33) Rated voltage :180-220  (customizable 110V)

34) Peak power :400-2200W  (Supports 68X1.5X10 lengthened tool bit

35) Maximum power :2200W

36) Actual power :500W

37) Body size :1200X1200x1380mm(L*W*H)

38) ACF bonding machine Machine weight :500KG

Remark:

TAB bonding machine OL-TVCBM1285-DH/SH-SS , is our company in the R&D process , according to maintenance staff tailored high-end products , machine not only in the accuracy of the temperature and the mechanical accuracy do the precision design , the procedures also increases the glass and circuit board parameters direct selected function , working pressure automatically switch , greatly facilitate the technical staff selected the parameters , increased the tool bit preheating function , to ensure that the machine at any temperature difference can ensure heating rate and temperature accuracy , double head design , glass and circuit board independent bonding reached factory-class level , high bonding excellent rate、low repair rate , this COF bonding machine is the maintenance and after-sales staff preferred the classic model.

TAB bonding machine OL-1285-DH/SH-SS platform Up to 100inch, the COF/TAB/ACF Bonding machine for TV repair,Television repair,Panel repair,screen repair. Welcome you visit us,our website:www.szoulian.com, It is your best choose for your TV COF repairing.

液晶电视维修辅助设备耗材 ,ACF胶带 AC-7206,AC-2056,G450去除液,日立蓝胶,酒精,丙酮,酒精瓶,棉布,纳米海绵,棉签,COF裁切刀,空压机,显微镜,热风枪,石英条,硅胶皮,铁氟龙,精密镊子,六角扳手,烙铁头,放大镜,校正仪,LVDS链接线, 驱动测试板等,免费随机附送整套,免费来厂学习,免费打出口木箱,欢迎来厂试机购买。

tab bonding machine
bonding machine

Accessories list:

1ACF  AC-7206-18  1.5*50M  Glass side ACF胶带
2ACF AC-2056R-35  2.0*50M PCB side ACF胶带
3ACF Removing Liquid  G-450  1000ML ACF去除液 G450
4Acetone Liquid BT-H1-500ML  丙酮
5Hitachi Blue Glue  100ML 蓝色胶水
6Fuji Silicone  50M 硅胶皮
7Teflon  50M 铁氟龙
8Alcohol  酒精
9Heating Solder Iron 30W +T-Type Soldering Tips T型烙铁+硅胶条
10Removing Wind Station Hot Air Gun 825+Fan 除风站 热风枪
11Optical Microscope 显微镜
12TAB Cutter   COF切刀
13Correction table   校正表
14LVDS                     LVDS接头
15LCD Test Board   LCD测试板
16Allen Key 六角扳手
17Air Compressor  OTS550 空压机
18Static Wipe Cloth 静电擦拭布
19Cotton swabs 棉签
20Handheld Magnifier 手持放大镜
21Precision Tweezers 精密镊子
22Nano Sponge 纳米海绵
23quatz bar spare one 备用石英条
24Alcohol bottles 空酒精瓶

TAB/COF/ACF Bonding machine,12-65/85/100inch Single/Double Stations bonding head TV Repair machine,ACF/TAB/COF bonding machine for TV/laptop repair,Television repair,Panel repair,screen repair.

tab bonding machine
bonding machines
Please follow and like us:
OLED-BONDING-machine

AMOLED Bonding Machine

AMOLED Bonding Machine

AMOLED bonding machine, is for AMOLED display produce and repair machine for TV/Cell phone/Watch/other AMOLED products.  bonding the COFs on the flexible FPCs.


What is OLED?

ACF bonding machine | COF Bonding machine | TAB bonding machine | OLB bonding machine | PCB bonding machine | FPC bonding machine | COG bonding machine | FOG bonding machine

An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphoneshandheld game consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row (and line) in the display is controlled sequentially, one by one,whereas AMOLED control uses a thin-film transistor backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight.

OLED Advantages

The different manufacturing process of OLEDs has several advantages over flat panel displays made with LCD technology.

Lower cost in the future

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing, theoretically making them cheaper to produce than LCD or plasma displays. However, fabrication of the OLED substrate is currently more costly than that of a TFT LCD. Roll-to-roll vapor-deposition methods for organic devices do allow mass production of thousands of devices per minute for minimal cost; however, this technique also induces problems: devices with multiple layers can be challenging to make because of registration – lining up the different printed layers to the required degree of accuracy.

Lightweight and flexible plastic substrates

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)can be used, the displays may be produced inexpensively. Furthermore, plastic substrates are shatter-resistant, unlike the glass displays used in LCD devices.

Better picture quality

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

Better power efficiency and thickness

LCDs filter the light emitted from a backlight, allowing a small fraction of light through. Thus, they cannot show true black. However, an inactive OLED element does not produce light or consume power, allowing true blacks. Removing the backlight also makes OLEDs lighter because some substrates are not needed. When looking at top-emitting OLEDs, thickness also plays a role when talking about index match layers (IMLs). Emission intensity is enhanced when the IML thickness is 1.3–2.5 nm. The refractive value and the matching of the optical IMLs property, including the device structure parameters, also enhance the emission intensity at these thicknesses.

Response time

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1 msfor their fastest color transition, and are capable of refresh frequencies as high as 240 Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,putting conservative estimates at under 10 μs (0.01 ms), which could theoretically accommodate refresh frequencies approaching 100 kHz (100,000 Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

Shenzhen Olian AMOLED bonding machine

Shenzhen Olian Automatic Equipment have the OLED bonding machine for AMOLED screens.

if you need the machine for the OLED screen repairing, please contact us .

AMOLED bonding machine- ACF attaching machine

ACF-ATTACHING-MACHINE

AMOLED bonding machine- COF Pre-bonding machine

FPC bonding machine

OLED bonding machine- COF Final-bonding machine

ACF bonding machine|COF Bonding machine|TAB bonding machine|OLB bonding machine|PCB bonding machine|FPC bonding machine|COG bonding machine|FOG bonding machine|

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei mate10,mate 20,OPPO/VIVO/MI/Samsung S8/Apple X etc.) repairing and produce business ,please contact us and test our OLED bonding machine.

OLED-BONDING-machine

OLED-BONDING-machine

All the bonding machines ,welcome you visit us-Shenzhen Olian(Professional in design&making all kinds of bonding machines)

Please follow and like us:
COF bonding machine

COF BONDING MACHINE

COF bonding machine

COF bonding machine, also name TAB bonding machine, ACF bonding machine, OLB Bonding machine, COF bonder,ACF Bonder,TAB bonder,TCP bonder,PCB bonder, TV panel repairing machine, panel bonding machine.

COF bonding machine is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The machine also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the machine is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonding machine photos

COF bonding machine
COF bonding machine
COF bonding machine
COF bonding machine
COF bonding machine
COF bonding machine and accessories

The machine working video:

Machine Operating Video in Youtube:

TV reparing Glass Side Bonding
TV reparing PCB Side Bonding

COF bonding machine Introduction

COF bonding machine is the widely used machine all over the world. This bonding machine is based on the recent innovations as well as planned to repair the arrangements of LCD, LED, and television. This bonding machine may consist of has two Digital Microscope, and also has a Digital Pressure Gauge. The machine consists of vacuum generator which may help to hold the panel during the bonding process. It may also provide the quick as well as easy solutions for various mobile problems. The machine is fast as well as it is very easy to access this bonding machine. This bonding machine is able to provide high accuracy repair apparatus for repair different size of the LED or LCD screen as well as LCD Panel. the machine also consists a process of repairing the technical equipment in an easy way.

We provide the various sizes and types of this machine, as well as all the services, are available if any defect may occur in the machine. Anisotropic conductive film (ACF) bonding machine commonly use in connectivity with electrical and mechanical connections from electronics driver to glass substrate of the LCD/LED/TV. During the ACF bonding process, heat and pressure are applied via a thermode (or hot bar) on to the ACF film or other component that is sandwiching the ACF film.

The bonding machine helps to repair LED,LCD,TV, of lining issues on panel . Ultimate solutions of bonding of COF with fast and easy to operate bonding machine. it is a kind of high precision repair equipment for repair various size LED/LCD screen/LCD Panel.

The Machine OL-1285-DH/SH-SS Specification

SPEC Download:

OL-TVCBM-1285-DH-SH-SS- SPEC.pdf

Single/double Head Manual platform ACF/TAB/COF Bonding machine for TV repair,Television repair,Panel repair,screen repair.

Machine Model Number:

1) Machine Model Number: OL-1285-DH/SH-SS   (Single Head &Double head)

2) Device Description :Screen Repair machine / LCD Bonding machine

3) Device Uses :FPC、 COF、TAB、 LCD Panel and PCB combination bonding

4) Applicable LCD panel specifications :12″-100″(65″,85″100″ options)

5) Applicable LCD panel thickness :0.3MM-1.1MM[Single glass]

6) Bonding IC number :Multiple / Panel   Can be set

7) Bind  direction :X or Y Unidirection

8) Bonding IC size :Replaceable blade according to IC specifications (The original machine is equipped45X1.5X10)

9) Device processing time :TFT,3.8S/chip

10) Production Beats :TAB,100 pcs/H

11) Accuracy :Within ± 1.5μm  (support 4K screen)

12) Highest positioning accuracy setting :±0.5μm (Currently domestic the highest index)

13) Equipment requirements the work environment :Clean, No dust, Clean room

14) Supply Pressure :0.5~0.7Mpa  (Dry air source)

15) Power Supply :AC 220V±10%,50HZ,3500W

Machine Parts Informations:

16) Cylinder Device :Japan SMC original thin cylinder  MXS20-75/MXS20-100

17) Heating Type :Pulse (rapid heating / cooling and auxiliary cooling function)

18) PID Temperature Control System :Brand: YUDIAN  (516 model)

Adjustable heating curve  Precision PID self-tuning type

The peak temperature : within +/- 3 degrees Celsius

Room temperature time to 180 degrees the response time within 2-3 seconds

19) Hot pressing head :

Materials: Japan Titanium

origin: United States

Plane precision (hot press side) :0.001mm

Plane thickness 0.5  (Reserved 3 times grinding)

20) Thermocouple Type :K type   Original US OMEGA wire

21) Industrial control units / Programmer :Import Panasonic PLC FX-C40T

22) Image unit :

Panasonic image processing system

COF counterpoint: down counterpoint

PCB counterpoint : UP counterpoint

Number of lenses : 4

Microscopy: 30-120 Continuous zoom

COF Display: 19-inch HD 1PCS

PCB counterpoint the display : same (Can be installed )

Upper light source : have

Down light source : have

23)COF trimming unit :

Origin: Taiwan

Rail Type: U-rail (2056 high)

Accuracy : 0.01

Adjustable direction :X/Y/R

R Itinerary : Coarse 360 degrees, fine tuning +/- 5 degrees

24)COF Fixture : COF mechanical clamping type, Z tilt radius  micrometer trimming

25) Lens spinner unit :

Control mode: X / Y / Z micrometer control

Focus Adjustment: Manually adjust the focus

26) Position detection : None

27) Silicone / Teflon :Manual switching position

28) LCD stage (platform) :Manual sliding or fixed optional ,automatic stage can be customized

29) Alarm device :Pressure abnormal/ temperature anomalies / thermocouple abnormal / action abnormal

30) Hot press head counterpoint :Cylinder stop can be set at any position in the vertical direction

31) Control mode :Touch screen + button operation   Using Taiwan’s Wei Lun touch screen dual-core

32) Parameter setting :According to the need to set up Store multiple sets of hot pressing parameters

Machine Electrical parameter:

33) Rated voltage :180-220  (customizable 110V)

34) Peak power :400-2200W  (Supports 68X1.5X10 lengthened tool bit

35) Maximum power :2200W

36) Actual power :500W

37) Body size :1200X1200x1380mm(L*W*H)

38) Machine weight :500KG

Remark:

OL-TVCBM1285-DH/SH-SS COF bonding machine , is our company in the R&D process , according to maintenance staff tailored high-end products , machine not only in the accuracy of the temperature and the mechanical accuracy do the precision design , the procedures also increases the glass and circuit board parameters direct selected function , working pressure automatically switch , greatly facilitate the technical staff selected the parameters , increased the tool bit preheating function , to ensure that the machine at any temperature difference can ensure heating rate and temperature accuracy , double head design , glass and circuit board independent bonding reached factory-class level , high bonding excellent rate、low repair rate , this machine is the maintenance and after-sales staff preferred the classic model.

OL-1285-DH/SH-SS platform Up to 100inch, the COF/TAB/ACF Bonding machine for TV repair,Television repair,Panel repair,screen repair. Welcome you visit us,our website:www.szoulian.com, It is your best choose for your TV COF repairing.

About the Accessories

COF bonding machine
cof bonding machine

Our COF bonding machine and all the accessories list for TV/laptop panel repairing as below: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Wechat/Whatsapp:+8618025364779

液晶电视维修辅助设备耗材 ,ACF胶带 AC-7206,AC-2056,G450去除液,日立蓝胶,酒精,丙酮,酒精瓶,棉布,纳米海绵,棉签,COF裁切刀,空压机,显微镜,热风枪,石英条,硅胶皮,铁氟龙,精密镊子,六角扳手,烙铁头,放大镜,校正仪,LVDS链接线, 驱动测试板等,免费随机附送整套,免费来厂学习,免费打出口木箱,欢迎来厂试机购买。

Accessories list:

1ACF  AC-7206-18  1.5*50M  Glass side ACF胶带
2ACF AC-2056R-35  2.0*50M PCB side ACF胶带 
3ACF Removing Liquid  G-450  1000ML ACF去除液 G450
4Acetone Liquid BT-H1-500ML  丙酮 
5Hitachi Blue Glue  100ML 蓝色胶水 
6Fuji Silicone  50M 硅胶皮 
7Teflon  50M 铁氟龙 
8Alcohol  酒精 
9Heating Solder Iron 30W +T-Type Soldering Tips T型烙铁+硅胶条 
10Removing Wind Station Hot Air Gun 825+Fan 除风站 热风枪 
11Optical Microscope 显微镜 
12TAB Cutter   COF切刀 
13Correction table   校正表 
14LVDS                     LVDS接头 
15LCD Test Board   LCD测试板 
16Allen Key 六角扳手 
17Air Compressor  OTS550 空压机 
18Static Wipe Cloth 静电擦拭布 
19Cotton swabs 棉签 
20Handheld Magnifier 手持放大镜 
21Precision Tweezers 精密镊子 
22Nano Sponge 纳米海绵 
23quatz bar spare one 备用石英条 
24Alcohol bottles 空酒精瓶 

12-85inch 100inch COF Bonding machine for TV Repairing machine,Welcome you visit us !

Please follow and like us:
1