7 inch LCD Bonding Machines

7 inch LCD Bonding Machines

7 inch LCD Bonding Machines: ACF attaching machine,COG/COF pre-bonding machine, COG/COF main bonding machine,FOG/FOB bonding machine.

7 inch LCD Bonding Machines -ACF attaching machine

ACF attaching machine OL-A003- 7 inch LCD Bonding Machines

1. Machine function:

1. 1 This equipment is a manual ACF attaching machine, which can paste conductive film (ACF) on LCD (or FPC), LCD (or FPC)

The pick and place is done manually, and the attaching is done automatically by the equipment.

1. 2 Suitable for attaching products from 1.0 inch to 7 inch. It can only be used for attaching of one LCD at one time.

2.Machine structure:

2.1 Equipment unit:

1)Machine Frame.

2)Bonding head system..

3)ACF system unit.

5)Panel platform

6)ACF cutting unit

7)ACF peeling unit

8)Device operation interface: HMI Touch screen

2.2 Work platform:

1)Panel size: Min: 1.0 inch  Max: 7.0 inch

2)FPC size :Min: L10*W6  Max: L300*W100mm

3:Unit Description

3.1 Machine performance:

1)Equipment capacity (C/T: cycle time): 4sec/pc,800pcs/H,

2)Rate of qualified products: ≥99％

3.2 Process parameter control

1)Parameter setting: setting on the HMI, for example: hot pressing time/motor speed, etc.

2)Touch screen password lock: have password function.  

Three layers of password functions, for Supplier, Engineer, operator

3.3 Special requirements:

3.3.1 Process flow:

  1) Manually place the Panel on the Panel platform.

  2) Press the vacuum button of Panel platform , Panel is attached to the Panel platform.

  3) Press the start button with both hands, Panel platform Move forward to the attacing position,

    and the thermal head will drop down.

  4) The hot pressing head heats the ACF on the Panel, After the fixed hot pressing time is up, the hot pressing head rises and peels off, The device peels off the ACF.

  5) The Panel platform moves back to the loading position, the same time, When the ACF rolls over the set length, and finish cutting..

  6) Manually remove the attached product

  7) The attachment of the second product repeats the above 1)~6)A step of

3.3.2 Features:

  1) Parameters (such as: hot pressing time / ACF attaching length Degree, etc.) can be set on the touch screen, and Touch screen display

  2) The alarm system catalog can be displayed on the touch screen,And can be cleared

3.3.3 Bonding accuracy X: ± 0.2, Y: ± 0.2mm

3.3.5 Panel&FPC One person is loading and unloading at the same position

3.3.6 Product changeover

1) Universal template, made of anti-static and anti-scratch materials

2) When replacing a new product, the adjustment time is about 20min

4.Electrical requirements:

4.1 Control System: PLC: Delta, for program modification

4.2 Solenoid valve :AIRTAC

4.3 Pressure regulating valve combination: AIRTAC

4.4 Power switch button: HAVE

4.5 Cylinder: AIRTAC

4.6 Motor: Taiwan brand

4.7 Buzzer: Have. The machine has any errors or needs to be mentioned, When the operator wakes up, the buzzer alarm works

4.8 Circuit protection

1) Mis operation, the machine does not move

2) The machine does not operate after power off.

3) The temperature of the head has upper and lower limits Features.

4.9 Anti-static plug grounding requirements: Need

4.10 Trachea/wire and other signs

1) Wire number identification at both ends of the wire

2) There are signs on both ends of the trachea

3) Complete identification of electrical accessories

4.11 Security:

1) On the right side of the operator standing side, there is an emergency stop button

2) Start with both hands

5 Machine architecture details:

5.1 Dimensions:

1) Machine width: about 600mm

2) Machine depth: about 660mm

3) Machine height: about 1280mm

4) Operating height: 900±10mm

5.2 Machine weight: About 150kg

5.3 Machine color: The surface of the frame is sprayed with oil, the color is Corrugated light yellow palladium, other parts are chrome plated or oxidized

5.4Equipment delivery status: The surface of the equipment is clean and dust-free. Place warning signs where there is danger.

5.5 Machine requirements the work environment : Clean, dust-free, clean room

5.6 Bonding head unit :

1) Number of hot heads: no pre-bonding heads; The press head 1PCS;

2) Drive up and down with the air cylinder.

3) Heating method: constant temperature

4) Temperature setting: RT~200℃,

5) Temperature difference of indenter surface: ± 5℃

6) The pressure adjustment method of the hot head: adjust with a precision pressure regulator

7) Preset pressure accuracy: 0.01MPa,

8) Pressure display: Digital display. unit: MPa, kgf/cm²,bar,psi optional

9) Hot head output: 15～240N,

10) Indenter size:maxL250*W4.0

11) Thermocouple model: K Type

12) Hot pressing time setting: 0.1 ~ 99.0Sec

13) The indenter has anti-fall device

14) Anti-scald device

   15) Anti-scald device

   16) The indenter has a hand-rolled silica gel device: Front and back roll

   17) The surface flatness of the indenter≤5 um

5.7 ACF system unit:

   1) The outer diameter of the ACF loaded wheel: MAX ￠150mm (to a roll of 200mm ACF)

   2) Inner diameter of ACF loaded wheel: MAX ￠18/25.4mm

   3) The width of ACF: 1~6.0mm

   4) ACF type: two or three layers

   5) ACF cutting depth adjustment method: Differential head, resolution 0.01mm

   6) ACF attachment length: 4~250mm

5.8 Panel platform:

   1) Single-station dual-rail cylinder drive.

   2) Diameter of platform vacuum hole: ￠ 1.0Or ￠ 1.2

   3) Adjustment distance in Z direction: -2.0～2.0 mm

   4) Platform material: Hard magnesium aluminum General template design for the platform.

5.9 ACF cutting unit:

   1) Shearing is adjustable in Y direction

   2) ACF cutting method: half cut

   3) Scissors drive mode: cylinder

   4) Scissors balance adjustment method: screw

5.10.Peeling unit:

   1) The peeling bar moves left and right

   2) Drive mode of the stripping rod: Cylinder

6 Energy requirements:

6.1 power supply

1) 1Phase AC220V/50Hz/300W

2) The power cord and compressed air line are in the lower side of the back of the machine

Part of the opening (the diameter of the hole ￠ 40~￠ 50mm) is drawn out, 2m cable.

6.2 Compressed air

1) Tracheal color: transparent

2) Tracheal diameter: ￠ 10mm

3) There is a 2m long ￠ outside the machine 10mm trachea, at the end of the trachea Connected with a quick connector, used to communicate with the factory Air connection

4) Working air pressure: 0.4~0.7MPa

5) Air consumption: ≈120L/min

6.3 Vacuum

1) Vacuum control method: vacuum button

2) Vacuum consumption: ≈24L/min

3) Color of vacuum tube: yellow

7 PACKING:

7.1 Wooden carton size: 70*75*150CM

7.2 Weight: About 180kg

• Working videos:

7 inch LCD Bonding Machines -COG/COF pre-bonding machine

COF/COG/COP pre-bonding machine OL-COF003

Machine Specification (Model Number:OL-COF003):

1. Machine function:

1.1 This equipment is a semi-automatic pre-bonding machine. It is a device that pre-bonding IC or COF on the Panel that has been attached to the conductive film (ACF). The pick and place of the Panel is completed manually, and the pre-alignment is automatically completed by the equipment.

Suitable for 2″～7″ Panel.

2.Machine structure:

2.1 Equipment unit:

1)Machine Frame. 1

2)Bonding head system: pre-bonding 1SETS.

3)Anti-falling device for bonding head:1SET

4)Feeding unit: IC feeding: IC box specifications are 2 inches, 3 inches, and 4 inches;

             COF feeding: universal feeding unit for all specifications

             IC loading and COF loading each one set with machine.

5)CCD unit: X.Y.Z sliding table. Can be installed under the Panel platform.

   6)Panel/PCB platform movable: X.Y.θ.Z direction movement positioning,

    Z direction is manually adjusted

7)Device operation interface: HMI Touch screen 1SET

2.2 Work platform:

1)Panel size: Min: 2.0 inch  Max: 7.0 inch

2)IC SIZE: Max：L*W:38*3 mm  Min：L*W:5*0.5 mm

3)FPC/COF size : Max：L*W:65*45 mm  Min：L*W:20*10 mm

3:Unit Description

3.1 Machine performance:

1)Equipment capacity (C/T: cycle time): IC: about 550PCS/H  COF: about 300PCS/H

2)Rate of qualified products:≥98%.

3.2 Process parameter control

1)Parameter setting: setting on the HMI, for example: hot pressing time/motor speed, etc.

2)Touch screen password lock: have password function.

3.3 Special requirements:

3.3.1 Process flow:

3.3.1.1  IC PART:

1) Open the machine, place the IC tray in advance and start the equipment;

2) The IC tray automatically moves to the adsorption position, the bonding head automatically corrects the IC after it is adsorbed, and then drops to the CCD camera IC mark position. After the photo is completed, the bonding head returns to the standby position;

3) The operator puts the Panel into the positioning position. Start the vacuum button. The Panel platform automatically moves to the glass mark position, and the equipment automatically performs alignment work;

4) After the alignment is completed, the equipment automatically do the pre-bonding.

5) After the pre-bonding time is over, the pre-bonding head rises and the platform exits to the loading position;

6) The operator takes out the pre-bonded glass;

7) Repeat 2)~6) to produce the next product

3.3.1.2 COF PART

   1) Open the machine , place the COF in advance and start the equipment;

   2) The COF feeding mechanism moves to the adsorption position, the bonding head adsorbs COF, the COF feeding mechanism exits, the pre-bonding head drops to the CCD camera position, and the bonding head returns to standby position (if it is a flexible screen, then rise to the standby position, and the IC disk to the flexible screen Photo position);.

   3) The operator puts the Panel into the positioning position. Start the vacuum button and the Panel platform automatically arrives the glass mark position, the equipment automatically performs alignment work;

   4) After the alignment is completed, the equipment will automatically do the pre-bonding,

 if it is a flexible screen, you can choose directly to do pre-bonding after taking pictures or do the pre-bonding after confirmation.

   5) After the pre-bonding time is over, the pre-bonding head rises and the platform exits to the loading position;

   6) The operator takes out the pre-bonded glass and puts COF on the COF feeding mechanism at the same time;

   7) Repeat 2)~6) to produce the next product

3.3.2 Features:

1) Parameters (such as: hot pressing time/cleaning time/roll silicone length/silicone

Scroll frequency, etc.) can be set on the touch screen and displayed on the touch screen

2) The directory of the alarm system can be displayed on the touch screen and can be cleared

3.3.3 Pitch Suitable for PITCH :18-25um

3.3.4 Bonding accuracy  IC:X：≦0.003mm， Y：≦0.003 mm

                      COF：X：≦0.004mm， Y：≦0.005 mm

3.3.5 Panel&COF One person is loading and unloading at the same position

3.3.6 Product changeover

1) Universal template, made of anti-static and anti-scratch materials

2) When replacing a new product, the adjustment time is about 15-30min

4.Electrical requirements:

4.1 Control System: PLC: Panasonic, for program modification

4.2 Solenoid valve : SMC、 CKD、

4.3 Pressure regulating valve combination: SMC、

4.4 Power switch button: Izumi  、Fuji

4.5 Cylinder: SMC,   Screw:THK   Guide: THK

4.6 Motor: Panasonic

4.7 Buzzer: Have. The machine has any errors or needs to be mentioned, When the operator wakes up, the buzzer alarm works

4.8 Circuit protection

1) Misoperation, the machine does not move

2) The machine does not operate after power failure

4.9 Anti-static plug grounding requirements: Need

4.10 Trachea/wire and other signs

1) Wire number identification at both ends of the wire

2) There are signs on both ends of the trachea

3) Complete identification of electrical accessories

4.11 Security:

1) On the right side of the operator standing side, there is an emergency stop button

5 Machine architecture details:

5.1 Dimensions:

1) Machine width: about 830+210mm (COF feeding mechanism)

2) Machine depth: about 760mm

3) Machine height: about 1340mm

4) Operating height: 800±10mm

5.2 Machine weight: About320kg

5.3 Machine color: The surface of the frame is sprayed with oil, the color is Corrugated light yellow palladium, other parts are chrome plated or oxidized

5.4Equipment delivery status: The surface of the equipment is clean and dust-free. Place warning signs where there is danger.

5.5 Machine requirements the work environment : Clean, dust-free, clean room

5.6 Bonding head unit :

1) Number of bonding head: 1 pre-bonding head, driven up and down by the servo motor and  

                        SMC cylinder;

2) Heating method: constant temperature,RT~150℃, ± 3℃

3) The pressure adjustment method of the hot head: adjust with SMC precision pressure regulator

4) Preset pressure accuracy: 0.01MPa, 0.01kgf/cm², 0.01bar, 0.1psi

5) Pressure display: Digital display. unit: MPa, kgf/cm²,bar,psi optional

6) Hot head output: 15～120N,

7)Bonding head size: IC: Pre-bonding head: L22*W2 (customizable)

                    COF: customized

8) Thermocouple model: K Type

9) Bonding time setting: 0.1 ~ 99.0Sec

10) Material of bonding head: SU440C

11) Adjustment method of indenter parallelism: adopt jacking adjustment,

  Stable and high sensitivity.

5.7 Backup section

IC: Material high-quality carbon steel

COF: Quartz

5.8 CCD Image unit :

   1) Two CCDs are aligned, installed at the bottom of the platform

   2) CCD Camera 1/3 B/W

   3) Magnification: X6   Center distance: 5～20mm

   5) Light source system: LED,

   6) Monitor:10.4″TFT screen 1

   7) CCD adjustment range: X: 20mm, Y: 10mm, Z: 10mm

5.9 Panel platform unit :

1) Single station, platform with servo motor + rail drive;

2) Platform drive: Panasonic motor, THK or Kuroda screw guide;

3) Diameter of platform vacuum hole: ￠1.2

4) Z direction adjustment distance (differential head adjustment): -2.0～2.0 mm

5) Universal template design for the platform, positioning block can be re-positioned after

  changing the Panel.

6) Flatness of template: ≤0.005 mm

5.10 FPC platform unit:NONE

6 Energy requirements:

6.1 power supply

1) 1Phase AC220V/50Hz/1200W

2) The power cord and compressed air line are in the lower side of the back of the machine

Part of the opening (the diameter of the hole ￠ 40~￠ 50mm) is drawn out, 1.5m cable.

6.2 Compressed air

1) Tracheal color: transparent

2) Tracheal diameter: ￠ 8mm

3) Working air pressure: 0.4~0.7MPa

4) Air consumption: ≈150L/min

6.3 Vacuum

1) Vacuum control method: vacuum button

2) Vacuum consumption: ≈36L/min

3) Color of vacuum tube: yellow

7 PACKING:

7.1 Wooden carton size: 115*86*155CM

7.2 Weight: About 400kg

7 inch LCD Bonding Machines -COG/COF main bonding machine

Double Stations Servo COG/COF/COP/FOB final bonding machine OL-C012

Machine Specification (Model Number:OL-C012):

1. Machine function:

This equipment is a manual bonding machine. It is a device that performs the main bonding on the display screen with IC, cable or COF pre-pressed. Manually pick and place the products, automatic bonding by machine.

Suitable for 1″～7″ glass screen or flexible screen products.

2.Machine structure:

2.1 Equipment unit:

1)Machine Frame. 1

2)Bonding head system: main-bonding 2SETS.

3)Anti-falling device for bonding head:2SET

4)CCD unit: no CCD and lens

5)Panel/PCB platform movable: 2SETS

6)FPC/COF platform: 0 SETS

7)Rolls of silicone tape: 2SETS

8)Device operation interface: HMI Touch screen 1SET

2.2 Work platform:

1)Panel size: Min: 1.0 inch  Max: 7.0 inch

2)FPC/COF size : according to the products,

3:Unit Description

3.1 Machine performance:

1)Equipment capacity (C/T: cycle time): IC: 600pcs/H, COF: 500PCS/H.

2)Rate of qualified products:IC≥99％ , COF≥95%.

3.2 Process parameter control

1)Parameter setting: setting on the HMI, for example: hot pressing time/motor speed, etc.

2)Touch screen password lock: have password function.

3.3 Special requirements:

3.3.1 Process flow:

1) Manually place the glass screen or flexible screen on the Panel workbench.

2) Press the vacuum button of the Panel workbench to attract the glass screen or flexible onto

 the Panel workbench.

3) Press the start button with both hands, the press head will automatically go down.

4) After the bonding time is over, the bonding head rises up and the main bonding ends.

5) Manually remove the heat-pressed glass screen or flexible screen.

6) Repeat the above actions.

3.3.2 Features:

1) Parameters (such as: hot pressing time/cleaning time/roll silicone length/silicone

Scroll frequency, etc.) can be set on the touch screen and displayed on the touch screen

2) The directory of the alarm system can be displayed on the touch screen and can be cleared

3.3.3 Pitch Suitable for PITCH ≥14um

3.3.4 Bonding accuracy  X:± 0.003， Y:± 0.003 mm .Pressure COF will expand, this is normal

3.3.5 Panel&FPC One person is loading and unloading at the same position

3.3.6 Product changeover

1) Universal template, made of anti-static and anti-scratch materials

2) When replacing a new product, the adjustment time is about 10min

4.Electrical requirements:

4.1 Control System: PLC: Panasonic,  Delta, for program modification

4.2 Solenoid valve : SMC、 CKD、 AIRTAC

4.3 Pressure regulating valve combination: SMC、 CKD、 AIRTAC

4.4 Power switch button: HAVE

4.5 Cylinder: SMC, CKD, Fujikura

4.6 Motor: Panasonic

4.7 Buzzer: Have. The machine has any errors or needs to be mentioned, When the operator wakes up, the buzzer alarm works

4.8 Circuit protection

1) Misoperation, the machine does not move

2) The machine does not operate after power failure

4.9 Anti-static plug grounding requirements: Need

4.10 Trachea/wire and other signs

1) Wire number identification at both ends of the wire

2) There are signs on both ends of the trachea

3) Complete identification of electrical accessories

4.11 Security:

1) On the right side of the operator standing side, there is an emergency stop button

2) Start with both hands

5 Machine architecture details:

5.1 Dimensions:

1) Machine width: about 900mm

2) Machine depth: about 800mm

3) Machine height: about 1440mm

4) Operating height: 800±10mm

5.2 Machine weight: About420kg

5.3 Machine color: The surface of the frame is sprayed with oil, the color is Corrugated light yellow palladium, other parts are chrome plated or oxidized

5.4Equipment delivery status: The surface of the equipment is clean and dust-free. Place warning signs where there is danger.

5.5 Machine requirements the work environment : Clean, dust-free, clean room

5.6 Bonding head unit :

1) Number of hot heads: no pre-bonding heads; The main bonding head 2PCS;

2) Drive up and down with the air cylinder. The height of the press head from the Panel is

about 30mm.

3) Heating method: constant temperature

4) Temperature setting: RT~400℃,

5) Temperature difference of indenter surface: ± 5℃

6) The pressure adjustment method of the hot head: adjust with a precision pressure regulator

7) Preset pressure accuracy: 0.01MPa, 0.01kgf/cm², 0.01bar, 0.1psi

8) Pressure display: Digital display. unit: MPa, kgf/cm²,bar,psi optional

9) Hot head output: 15～800N,

10)Bonding head size: customized according to the requirements of the user products

11) Thermocouple model: K Type

12) Bonding time setting: 0.1 ~ 99.0Sec

13) The bonding head has anti-fall device

14) Anti-scald device

15) Material of bonding head: Ceramic/ Tungsten steel/SU440C

16) Adjustment method of indenter parallelism: adopt jacking adjustment,

  Stable and high sensitivity.

5.7 Backup section

1) Material: quartz strip or ceramic (display screen)

2) When it is a jig, it can be made as required

5.8 CCD Image unit :NONE

5.9 Panel platform unit :

1) Double station, fixed platform separately

2) Diameter of platform vacuum hole: ￠ 1.2

3) Adjusting distance in Z direction: -5.0～5.0 mm, using lifting adjustment.

4) Platform material: Hard magnesium aluminum

5) Universal template design for the platform, positioning block positioning (FR4) can be replaced, positioning after Panel.

6) Flatness of template: ≤0.05 mm

5.10 FPC platform unit:NONE

6 Energy requirements:

6.1 power supply

1) 1Phase AC220V/50Hz/1200W

2) The power cord and compressed air line are in the lower side of the back of the machine

Part of the opening (the diameter of the hole ￠ 40~￠ 50mm) is drawn out, 1.5m cable.

6.2 Compressed air

1) Tracheal color: transparent

2) Tracheal diameter: ￠ 8mm

3) Working air pressure: 0.4~0.7MPa

4) Air consumption: ≈150L/min

6.3 Vacuum

1) Vacuum control method: vacuum button

2) Vacuum consumption: ≈240L/min

3) Color of vacuum tube: yellow

7 PACKING:

7.1 Wooden carton size: 100*90*165CM

7.2 Weight: About 500kg

7 inch LCD Bonding Machines -FOG/FOB bonding machine

UP and Down alignment FOG/FOB bonding machine OL-F006

Machine Specification (Model Number:OL-F006):

1. Machine function:

This equipment is a UP and Down alignment manual constant temperature bonding machine, which is connected the FPC/Zebra paper on the PCB/Glass with the conductive film (ACF) attached.

For aligning bonding equipment, the pick and place and alignment of PCB/Panel are done manually, and bonding is done automatically by the equipment. Suitable for 1″～12″ flat glass and flexible screen products bonding.

2.Machine structure:

2.1 Equipment unit:

1)Machine Frame.

2)Bonding head system: main-bonding 2SETS.

3)Anti-falling device for bonding head.2SET

4)CCD unit, 4 SETS , 2 for down alignment.2 for Up Alignment

5)Panel/PCB platform movable: 2SETS

6)FPC platform 2SETS

7)Rolls of silicone tape 2SETS

8)Device operation interface: HMI Touch screen 1SET

2.2 Work platform:

1)Panel size: Min: 1.0 inch  Max: 12.0 inch

2)FPC size :Min: L5*W15  Max: L90*W60mm

3:Unit Description

3.1 Machine performance:

1)Equipment capacity (C/T: cycle time): FPC: 12sec/pc,250-300pcs/H,6000pcs/day, 20hrs/day.

2)Rate of qualified products: FPC≥98％

3.2 Process parameter control

1)Parameter setting: setting on the HMI, for example: hot pressing time/motor speed, etc.

2)Touch screen password lock: have password function.

3.3 Special requirements:

3.3.1 Process flow:

1) Manually place the Panel on the Panel workbench

2) Press the vacuum button of the Panel workbench, Panel is attached to the Panel workbench

3) Place the zebra paper/FPC to be hot pressed on the FPC workbench

, And initially positioned with the Panel and vacuum adsorption.

4) The operator looks at the display on the MONITOR to perform alignment work.

5) The operator presses the start button with both hands, the platform enters, and the bonding head presses down.

6) After the hot pressing time , the hot pressing head rises and the hot pressing ends.

7) Manually remove the hot-pressed Module

8) Repeat 1~7 to do the next product

3.3.2 Features:

1) Parameters (such as: hot pressing time/cleaning time/roll silicone length/silicone

Scroll frequency, etc.) can be set on the touch screen and displayed on the touch screen

2) The directory of the alarm system can be displayed on the touch screen and can be cleared

3.3.3 Pitch Suitable for PITCH ≥20um

3.3.4 Bonding accuracy X: ± 0.01, Y: ± 0.01mm

3.3.5 Panel&FPC One person is loading and unloading at the same position

3.3.6 Product changeover

1) Universal template, made of anti-static and anti-scratch materials

2) When replacing a new product, the adjustment time is about 10min

4.Electrical requirements:

4.1 Control System: PLC: Delta, for program modification

4.2 Solenoid valve :AIRTAC

4.3 Pressure regulating valve combination: AIRTAC

4.4 Power switch button: HAVE

4.5 Cylinder: AIRTAC

4.6 Motor: NO

4.7 Buzzer: Have. The machine has any errors or needs to be mentioned, When the operator wakes up, the buzzer alarm works

4.8 Circuit protection

1) Misoperation, the machine does not move

2) The machine does not operate after power failure

4.9 Anti-static plug grounding requirements: Need

4.10 Trachea/wire and other signs

1) Wire number identification at both ends of the wire

2) There are signs on both ends of the trachea

3) Complete identification of electrical accessories

4.11 Security:

1) On the right side of the operator standing side, there is an emergency stop button

2) Start with both hands

5 Machine architecture details:

5.1 Dimensions:

1) Machine width: about 850mm

2) Machine depth: about 880mm

3) Machine height: about 1460mm

4) Operating height: 800±10mm

5.2 Machine weight: About 280kg

5.3 Machine color: The surface of the frame is sprayed with oil, the color is Corrugated light yellow palladium, other parts are chrome plated or oxidized

5.4Equipment delivery status: The surface of the equipment is clean and dust-free. Place warning signs where there is danger.

5.5 Machine requirements the work environment : Clean, dust-free, clean room

5.6 Bonding head unit :

1) Number of hot heads: no pre-bonding heads; The press head 2PCS;

2) Drive up and down with the air cylinder. The height of the press head from the Panel is

about 60mm.

3) Heating method: pulse heating

4) Temperature setting: RT~400℃,

5) Temperature difference of indenter surface: ± 5℃

6) The pressure adjustment method of the hot head: adjust with a precision pressure regulator

7) Preset pressure accuracy: 0.01MPa, 0.01kgf/cm², 0.01bar, 0.1psi

8) Pressure display: Digital display. unit: MPa, kgf/cm²,bar,psi optional

9) Hot head output: 15～300N,

10)Bonding head size: customized according to the requirements of the user unit (90*1.0 )

11) Thermocouple model: K Type

12) Hot pressing time setting: 0.1 ~ 99.0Sec

13) The indenter has anti-fall device

14) Anti-scald device

15) Material of pressure head: Tungsten steel/SU440C

16) Adjustment method of indenter parallelism: adopt jacking adjustment,

Stable and high sensitivity.

5.7 Backup section

1) For LCD, Material: Crystal gall strip (for glass side)

2) For PCB, Material: high quality carbon die steel ,RT~150℃

5.8 CCD Image unit :

1) 2 CCD alignment under the platform installation and 2 CCD down ,

2) CCD Camera 1/3 B/W

3) Overall magnification: FPC: LENS 2X,

4) CCD center distance: 10～90mm

5) Light source system: lens with coaxial light, with LED on the top light source,

6) Monitor: 1 monitor screen 10.1inch (optional)

7) CCD adjustment range (single): X: 10～110mm  Y: 10mm,  Z: 10mm

8) CCD fixing frame adopts X, Y, Z structure adjustment

5.9 Panel platform unit :

1) Double station, fixed platform respectively

2) Diameter of platform vacuum hole: ￠ 1.2

3) Adjustment distance in Z direction: -5.0～5.0 mm Adjust with lift.

4) Platform material: Hard magnesium aluminum

5) Platform general template design, positioning block positioning (FR4),Replaceable, positioning after Panel.

6) Flatness of template: ≤0.05 mm

5.10 FPC platform unit:

1) Diameter of platform vacuum hole: ￠ 1.0

2) X/Y/θ/Z direction adjustment method: use micrometer Adjuster

3) X/Y direction adjustment distance: 0～10.0mm

4) Z direction adjustment distance (adjust with screws): -2.0～2.0 mm

5) θ direction adjustment angle: ± 3°

6) Platform material: Hard magnesium aluminum

7) Platform common template design, replaceable

6 Energy requirements:

6.1 power supply

1) 1Phase AC220V/50Hz/1200W

2) The power cord and compressed air line are in the lower side of the back of the machine

Part of the opening (the diameter of the hole ￠ 40~￠ 50mm) is drawn out, 1.5m cable.

6.2 Compressed air

1) Tracheal color: transparent

2) Tracheal diameter: ￠ 8mm

3) Working air pressure: 0.4~0.7MPa

4) Air consumption: ≈220L/min

6.3 Vacuum

1) Vacuum control method: vacuum button

2) Vacuum consumption: ≈160L/min

3) Color of vacuum tube: yellow

7 PACKING:

7.1 Wooden carton size: 95*98*165CM

7.2 Weight: About 350kg

7 inch LCD Bonding Machines,ACF attaching machine+COG/COF pre-bonding+COG/COF main bonding+FOG/FOB bonding machines.

Shenzhen Olian is a Professional LCD/LED/OLED bonding Machine Manufacturer. We do the Research&Develop&Design&Make&Sell the best and latest IC/COG/COB/COF/COP/FPC/FOG/FOB/FOF/TAB/OLB/ACF/ Bonding Machine/bonder and tools for TV/Mobilephone/Laptop/Watch/Touch and other Screens.We also offer all the bonding machine parts and all the accessories.