页面 szol2019 ,作者ACF Bonding Machine|COF Bonding Machine| - 第2页 共4页
  • +86-18025364779
  • olian@szolian.com

Author Archive szol2019

LCD repair machine

LCD repair machine, for mobile phone oled led lcd screen panel flex cable cof repair acf bonding machine

LCD repair machine, widely used in the Phone/TV/Watch/Touch panel products produce and repairing area.

LCD repair machine-What is LCD ?

LCD Liquid crystal display (LCD) is LCD panel that is widely used in mobile phones, LCD, LCM and other production processes. Is composed of two glass sheets laminated together, the middle is LCD, the lower plate is TFT circuit, the board is RGB and subsidiary structure, Glass is called a glass substrate when the lcd production, which not been cut is called Glass, a process finished  cutting  called CELL.

LCD GLASS can be divided into TN, VA, IPS, CPA and many other types. Can largely determine the brightness of the LCD display, contrast, color, viewing angle and speed the development of LCD panel soon , the part of LCD panel with liquid crystal displays are very closely linked, its production and market environment, the pros and cons variety of factors related tothe quality of  the liquid crystal display , price and market trends, as an LCD display for about 80 percent of its costs are concentrated in the panel.

LCD repair machine-What is LCD PANEL?

LCD panel used in mobile phone ,TV,Touch panel,pad ,laptop,watches and clocks, and many display type of portable computer.

LCD display to use two pieces of polarized materials, is a liquid crystal solution between them.Current by rearranging will make the liquid crystal, so that the light can’t through them.As a result, each crystal is like a shutter, both can allows light to pass through and can block the light.

Liquid crystal display (LCD) technology information Towards the target   OF thin, short, small development, display with a long history in computer peripheral products, of course, is no exception.

Under easy to carry and transport for the former title, the traditional way of display, such as the CRT image tube display and LED display boards, etc., are subject to the volume is too large or giant factors such as power consumption, unable to reach the user’s actual demand.And the development of liquid crystal display technology is to the current trend of the information goods, whether it is right Angle display, low power consumption, small volume, or zero radiation, etc, can let users enjoy the best visual environment.

Application in the resistive screen, touch screen, capacitance composite and LCD screen, Lens and Lens laminating, LCD, LCM, OCA laminating, soft on soft joint, ITO film, PMMA, PC, PET, glass, electronic paper, projection screen assembly, display assembly, Lens assembly, G +  F +F resistive touch screens, F + F, capacitive touch screen, panel, ICON, and other related electronic.

LCD repair machine -LCD bonding machine

According to the different bonding materials, the bonding machine can be divided into different bonding machines.

LCD repair machine  -COG bonding machine

LCD bonding machine

COG bonding machine, also name IC Bonding machine, Chips bonding machine, COG(Chip on glass) bonding machine, it is bonding the Chip IC on the glass using ACF conductive adhesive as medium, by a certain temperature, pressure, time, driver IC will be bonded onto the glass. COG bonding machine has COG Pre-Bonding Machine and COG Main-Bonding Machine. They are all constant temperature machines. it maybe have single station ,double stations, three stations, and maybe four stations bonding machine.

LCD repair machine – FOG bonding machine

LCD bonding machine

FOG bonding machine, also name FOB bonding machineFPC bonding machineFlex cable bonding machine.FOG(FPC on glass )or FOB(FPC on PCB Board), FOF(FPC on FPC), also COF on Glass bonding, COF on board bonding, COF on film bonding. It have Pulse Heating Bonding Machines and Constant Temperature Bonding Machines.

LCD repair machine – ACF attaching machine

LCD bonding machine
ACF-ATTACHING-MACHINE

ACF attaching machine which is attaching the ACF tape on the Glass/Board/FPC/COF before bonding. it also name ACF machine, ACF attachment machine, ACF Attached machine , ACF bonding machine , ACF pre-paste , ACF equipment , ACF pre-paste machines , ACF pre- affixed equipment, ACF single station machine , ACF multi-station machines and so on.  The attaching machine, also can paste the Double-sided tape.

LCD repair machine-LCM Making machines

LCD bonding machine

Semi Automatic LCM Making machines include:COG pre-bonding machine, COG main-bonding machine , FOGFOB) bonding machine, ACF attaching machine as below:

LCD bonding machine

LCD bonding machine

LCD making machine-Full automatic COG bonding machine

full auto COG bonding machine

Full automatic COG bonding machine, it include the LCD cleaning, IC loading, ACF attaching on the glass, IC pre-bonding, and IC main-bonding processes.

LCD making machine-Full automatic FOG bonding machine

Full automatic FOG bonding machine, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCD bonding machine-LCM full automatic produce machine

LCM full automatic produce machine include all the process of the COG and FOG bonding machines.

We design and make the standard bonding machines and customized bonding machines for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

TV LCD/LED/OLED panel repair machine:COF bonding machine/TAB bonding machine/ACF bonding machine

COF bonding machine, also name TAB bonding machineACF bonding machineOLB Bonding machineChip on Film bonding machine. COF(Chip on Film, Chip on Flex).COF bonding machine is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonding machine also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonding machine is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonding machine accessories

Our COF bonding machine and all the accessories list for TV/laptop panel repairing as below:

COF bonding machine

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Please contact us feel free to  purchase the COF bonding machine accessories.

ACF Tape/ACF Film  & Applications

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

ACF Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF TAPE

ACF tape & ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

Teflon Tape ( Teflon cushion)

Similar to Silicone rubber, Teflon tape is often used to provide evenly distributed pressure and temperature on the ACF bonding process.

Features of Teflon Tape :

  1. Superior chemical resistance – hardly affected by acids and alkalis.
  2. Excellent electrical properties, including little dielectric loss, high insulation resistance and breakdown voltage.
  3. Extremely high volume resistivity and remain stable over a wide range of temperature.
  4. Continuous use in a wide range of temperature from -100degC to +260degC
  5. Lowest friction cofficient among all solid materials and excellent self-lubricating ability.
  6. Non-adhesiveness and mold releasing property
  7. Excellent weather and moisture resistance
  8. Superior flame resistance

ACF Remover

ACF REMOVER

ACF REMOVER G450/G550/G650/G750

ACF Remover is a solvent designed to removed hardened ACF during rework of LCD module assembly. have many model number as: G430,G450,G550,G650,G750

ACF Remover Removing Process :

  1. Apply ACF Remover on the FPC/COG
  2. Wait 3~5 minutes for ACF Remover to react and soften ACF bond
  3. Remove ACF after 3~5 minutes
  4. Cleaning with aqueous liquid or acetone

our bonding machines and all the accessories。

COF bonding machine accessories

COF bonding machine accessories

Welcome to buy the COF bonding machine and all the COF bonding machine accessories.

OLED panel bonding machine

OLED panel bonding machine, is for AMOLED panel produce and repair machine for TV/Cell phone/Watch/other AMOLED products.  bonding the COFs on the OLED panel and flexible FPCs.


What is OLED?

ACF bonding machine | COF Bonding machine | TAB bonding machine | OLB bonding machine | PCB bonding machine | FPC bonding machine | COG bonding machine | FOG bonding machine

An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphoneshandheld game consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row (and line) in the display is controlled sequentially, one by one,whereas AMOLED control uses a thin-film transistor backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight.

OLED Advantages

The different manufacturing process of OLEDs has several advantages over flat panel displays made with LCD technology.

Lower cost in the future

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing, theoretically making them cheaper to produce than LCD or plasma displays. However, fabrication of the OLED substrate is currently more costly than that of a TFT LCD. Roll-to-roll vapor-deposition methods for organic devices do allow mass production of thousands of devices per minute for minimal cost; however, this technique also induces problems: devices with multiple layers can be challenging to make because of registration – lining up the different printed layers to the required degree of accuracy.

Lightweight and flexible plastic substrates

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)can be used, the displays may be produced inexpensively. Furthermore, plastic substrates are shatter-resistant, unlike the glass displays used in LCD devices.

Better picture quality

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

Better power efficiency and thickness

LCDs filter the light emitted from a backlight, allowing a small fraction of light through. Thus, they cannot show true black. However, an inactive OLED element does not produce light or consume power, allowing true blacks. Removing the backlight also makes OLEDs lighter because some substrates are not needed. When looking at top-emitting OLEDs, thickness also plays a role when talking about index match layers (IMLs). Emission intensity is enhanced when the IML thickness is 1.3–2.5 nm. The refractive value and the matching of the optical IMLs property, including the device structure parameters, also enhance the emission intensity at these thicknesses.

Response time

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1 msfor their fastest color transition, and are capable of refresh frequencies as high as 240 Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,putting conservative estimates at under 10 μs (0.01 ms), which could theoretically accommodate refresh frequencies approaching 100 kHz (100,000 Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

Shenzhen Olian OLED panel bonding machine

Shenzhen Olian Automatic Equipment have the OLED bonding machine for AMOLED screens.

if you need the machine for the OLED screen repairing, please contact us .

OLED panel bonding machine- ACF attaching machine

LCD repair machine

OLED panel bonding machine- COF Pre-bonding machine

LCD repair machine
LCD repair machine
LCD repair machine

OLED panel bonding machine- COF Final-bonding machine

LCD repair machine
LCD repair machine

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our OLED bonding machine.

OLED-BONDING-machine

LCD-repair-machine

All the LCD repair bonding making machines ,welcome you visit us-Shenzhen Olian(Professional in design&making all kinds of bonding machines)

LCD Bonding machine
COF bonding machine

LCD panel bonding Machine

LCD panel bonding Machine

LCD panel bonding machine, widely used in the Phone/TV/Watch/Touch panel products produce and repairing area.

What is LCD ?

LCD Liquid crystal display (LCD) is LCD panel that is widely used in mobile phones, LCD, LCM and other production processes. Is composed of two glass sheets laminated together, the middle is LCD, the lower plate is TFT circuit, the board is RGB and subsidiary structure, Glass is called a glass substrate when the lcd production, which not been cut is called Glass, a process finished  cutting  called CELL.

LCD GLASS can be divided into TN, VA, IPS, CPA and many other types. Can largely determine the brightness of the LCD display, contrast, color, viewing angle and speed the development of LCD panel soon , the part of LCD panel with liquid crystal displays are very closely linked, its production and market environment, the pros and cons variety of factors related tothe quality of  the liquid crystal display , price and market trends, as an LCD display for about 80 percent of its costs are concentrated in the panel.

What is LCD PANEL?

LCD panel used in digital watches and clocks, and many display type of portable computer.LCD display to use two pieces of polarized materials, is a liquid crystal solution between them.Current by rearranging will make the liquid crystal, so that the light can’t through them.As a result, each crystal is like a shutter, both can allows light to pass through and can block the light.

Liquid crystal display (LCD) technology information Towards the target   OF thin, short, small development, display with a long history in computer peripheral products, of course, is no exception.Under easy to carry and transport for the former title, the traditional way of display, such as the CRT image tube display and LED display boards, etc., are subject to the volume is too large or giant factors such as power consumption, unable to reach the user’s actual demand.And the development of liquid crystal display technology is to the current trend of the information goods, whether it is right Angle display, low power consumption, small volume, or zero radiation, etc, can let users enjoy the best visual environment.

Application in the resistive screen, touch screen, capacitance composite and LCD screen, Lens and Lens laminating, LCD, LCM, OCA laminating, soft on soft joint, ITO film, PMMA, PC, PET, glass, electronic paper, projection screen assembly, display assembly, Lens assembly, G +  F +F resistive touch screens, F + F, capacitive touch screen, panel, ICON, and other related electronic.

LCD panel bonding machine

According to the different bonding materials, the bonding machine can be divided into different panelbonding machines.

LCD panel bonding machine -COG bonding machine

LCD panel bonding machine

COG bonding machine, also name IC Bonding machine, Chips bonding machine, COG(Chip on glass) bonding machine, it is bonding the Chip IC on the glass using ACF conductive adhesive as medium, by a certain temperature, pressure, time, driver IC will be bonded onto the glass. COG bonding machine has COG Pre-Bonding Machine and COG Main-Bonding Machine. They are all constant temperature machines. it maybe have single station ,double stations, three stations, and maybe four stations bonding machine.

LCD panel bonding machine – FOG bonding machine

LCD panel bonding machine

FOG bonding machine, also name FOB bonding machineFPC bonding machineFlex cable bonding machine.FOG(FPC on glass )or FOB(FPC on PCB Board), FOF(FPC on FPC), also COF on Glass bonding, COF on board bonding, COF on film bonding. It have Pulse Heating Bonding Machines and Constant Temperature Bonding Machines.

LCD panel bonding machine – ACF attaching machine

LCD panel bonding machine
ACF-ATTACHING-MACHINE

ACF attaching machine which is attaching the ACF tape on the Glass/Board/FPC/COF before bonding. it also name ACF machine, ACF attachment machine, ACF Attached machine , ACF bonding machine , ACF pre-paste , ACF equipment , ACF pre-paste machines , ACF pre- affixed equipment, ACF single station machine , ACF multi-station machines and so on.  The attaching machine, also can paste the Double-sided tape.

LCD panel bonding machine-
Semi Automatic LCM Making machines

LCD panel bonding machine

Semi Automatic LCM Making machines include:COG pre-bonding machine, COG main-bonding machine , FOGFOB) bonding machine, ACF attaching machine as below:

LCD panel bonding machine

LCD panel bonding machine

LCD panel bonding machine-Full automatic COG bonding machine

full auto COG bonding machine

Full automatic COG bonding machine, it include the LCD cleaning, IC loading, ACF attaching on the glass, IC pre-bonding, and IC main-bonding processes.

LCD panel bonding machine-Full automatic FOG bonding machine

Full automatic FOG bonding machine, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCD panel bonding machine-LCM full automatic produce machine

LCM full automatic produce machine include all the process of the COG and FOG bonding machines.

We design and make the standard bonding machines and customized bonding machines for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

COF bonding machine/TAB bonding machine/ACF bonding machine

COF bonding machine, also name TAB bonding machineACF bonding machineOLB Bonding machineChip on Film bonding machine. COF(Chip on Film, Chip on Flex).COF bonding machine is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonding machine also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonding machine is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonding machine accessories

Our COF bonding machine and all the accessories list for TV/laptop panel repairing as below:

COF bonding machine

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Please contact us feel free to  purchase the COF bonding machine accessories.

ACF Tape/ACF Film  & Applications

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

ACF Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF TAPE

ACF TAPE

ACF tape & ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

Teflon&Silicone Tape ( Teflon &Silicone cushion)

Similar to Silicone rubber, Teflon tape is often used to provide evenly distributed pressure and temperature on the ACF bonding process.

Features of Teflon Tape :

  1. Superior chemical resistance – hardly affected by acids and alkalis.
  2. Excellent electrical properties, including little dielectric loss, high insulation resistance and breakdown voltage.
  3. Extremely high volume resistivity and remain stable over a wide range of temperature.
  4. Continuous use in a wide range of temperature from -100degC to +260degC
  5. Lowest friction cofficient among all solid materials and excellent self-lubricating ability.
  6. Non-adhesiveness and mold releasing property
  7. Excellent weather and moisture resistance
  8. Superior flame resistance

ACF Remover

ACF REMOVER

ACF REMOVER G450/G550/G650/G750

ACF Remover is a solvent designed to removed hardened ACF during rework of LCD module assembly. have many model number as: G430,G450,G550,G650,G750

ACF Remover Removing Process :

  1. Apply ACF Remover on the FPC/COG
  2. Wait 3~5 minutes for ACF Remover to react and soften ACF bond
  3. Remove ACF after 3~5 minutes
  4. Cleaning with aqueous liquid or acetone

Buy machine, send all the accessories list free.

1COF bonding machine  
2ACF  AC-7206-18  1.5*50M  Glass side ACF胶带
3ACF AC-2056R-35  2.0*50M PCB side ACF胶带
4ACF Removing Liquid  G-450  1000ML ACF去除液 G450
5Acetone Liquid BT-H1-500ML  丙酮
6Hitachi Blue Glue  100ML 蓝色胶水
7Fuji Silicone  50M 硅胶皮
8Teflon  50M 铁氟龙
9Alcohol  酒精
10Heating Solder Iron 30W +T-Type Soldering Tips T型烙铁+硅胶条
11Removing Wind Station Hot Air Gun 825+Fan 除风站 热风枪
12Optical Microscope 显微镜
13TAB Cutter   COF切刀
14Correction table   校正表
15LVDS                     LVDS接头
16LCD Test Board   LCD测试板
17Allen Key 六角扳手
18Air Compressor  OTS550 空压机
19Static Wipe Cloth 静电擦拭布
20Cotton swabs 棉签
21Handheld Magnifier 手持放大镜
22Precision Tweezers 精密镊子
23Nano Sponge 纳米海绵
24quatz bar spare one 备用石英条
25Alcohol bottles 空酒精瓶
COF bonding machine accessories

COF bonding machine and accessories

Welcome to buy the COF bonding machine and all the COF bonding machine accessories.

LCD panel bonding machine, for TV/Mobilephone/Touch screen/Watch/Ipad/Laptop/AD display……all kinds of LCD/LED/OLED panels bonding.. for factories,shops,repairing service center,labs,Research institutes.

All the bonding machines and all the parts,accessories.we can offer to you in one stop.

Welcome you visit our factory for LCD PANEL BONDING MACHINE more details.

FOB BONDER

LCD bonding Machine

LCD bonding Machine

LCD bonding machine, widely used in the Phone/TV/Watch/Touch panel products produce and repairing area.

LCD bonding machine-What is LCD ?

LCD Liquid crystal display (LCD) is LCD panel that is widely used in mobile phones, LCD, LCM and other production processes. Is composed of two glass sheets laminated together, the middle is LCD, the lower plate is TFT circuit, the board is RGB and subsidiary structure, Glass is called a glass substrate when the lcd production, which not been cut is called Glass, a process finished  cutting  called CELL.

LCD GLASS can be divided into TN, VA, IPS, CPA and many other types. Can largely determine the brightness of the LCD display, contrast, color, viewing angle and speed the development of LCD panel soon , the part of LCD panel with liquid crystal displays are very closely linked, its production and market environment, the pros and cons variety of factors related tothe quality of  the liquid crystal display , price and market trends, as an LCD display for about 80 percent of its costs are concentrated in the panel.

LCD bonding machine-What is LCD PANEL?

LCD panel used in digital watches and clocks, and many display type of portable computer.LCD display to use two pieces of polarized materials, is a liquid crystal solution between them.Current by rearranging will make the liquid crystal, so that the light can’t through them.As a result, each crystal is like a shutter, both can allows light to pass through and can block the light.

Liquid crystal display (LCD) technology information Towards the target   OF thin, short, small development, display with a long history in computer peripheral products, of course, is no exception.Under easy to carry and transport for the former title, the traditional way of display, such as the CRT image tube display and LED display boards, etc., are subject to the volume is too large or giant factors such as power consumption, unable to reach the user’s actual demand.And the development of liquid crystal display technology is to the current trend of the information goods, whether it is right Angle display, low power consumption, small volume, or zero radiation, etc, can let users enjoy the best visual environment.

Application in the resistive screen, touch screen, capacitance composite and LCD screen, Lens and Lens laminating, LCD, LCM, OCA laminating, soft on soft joint, ITO film, PMMA, PC, PET, glass, electronic paper, projection screen assembly, display assembly, Lens assembly, G +  F +F resistive touch screens, F + F, capacitive touch screen, panel, ICON, and other related electronic.

LCD bonding machine

According to the different bonding materials, the bonding machine can be divided into different bonding machines.

LCD bonding machine -COG bonding machine

LCD bonding machine

COG bonding machine, also name IC Bonding machine, Chips bonding machine, COG(Chip on glass) bonding machine, it is bonding the Chip IC on the glass using ACF conductive adhesive as medium, by a certain temperature, pressure, time, driver IC will be bonded onto the glass. COG bonding machine has COG Pre-Bonding Machine and COG Main-Bonding Machine. They are all constant temperature machines. it maybe have single station ,double stations, three stations, and maybe four stations bonding machine.

LCD bonding machineFOG bonding machine

LCD bonding machine

FOG bonding machine, also name FOB bonding machineFPC bonding machineFlex cable bonding machine.FOG(FPC on glass )or FOB(FPC on PCB Board), FOF(FPC on FPC), also COF on Glass bonding, COF on board bonding, COF on film bonding. It have Pulse Heating Bonding Machines and Constant Temperature Bonding Machines.

LCD bonding machineACF attaching machine

LCD bonding machine
ACF-ATTACHING-MACHINE

ACF attaching machine which is attaching the ACF tape on the Glass/Board/FPC/COF before bonding. it also name ACF machine, ACF attachment machine, ACF Attached machine , ACF bonding machine , ACF pre-paste , ACF equipment , ACF pre-paste machines , ACF pre- affixed equipment, ACF single station machine , ACF multi-station machines and so on.  The attaching machine, also can paste the Double-sided tape.

LCD bonding machine-LCM Making machines

LCD bonding machine

Semi Automatic LCM Making machines include:COG pre-bonding machine, COG main-bonding machine , FOGFOB) bonding machine, ACF attaching machine as below:

LCD bonding machine

LCD bonding machine

LCD bonding machine-Full automatic COG bonding machine

full auto COG bonding machine

Full automatic COG bonding machine, it include the LCD cleaning, IC loading, ACF attaching on the glass, IC pre-bonding, and IC main-bonding processes.

LCD bonding machine-Full automatic FOG bonding machine

Full automatic FOG bonding machine, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCD bonding machine-LCM full automatic produce machine

LCM full automatic produce machine include all the process of the COG and FOG bonding machines.

We design and make the standard bonding machines and customized bonding machines for your personalized product requirements, also design and manufacture other automation equipment for your requirements, and welcome OEM&ODM machines.

COF bonding machine/TAB bonding machine/ACF bonding machine

COF bonding machine, also name TAB bonding machineACF bonding machineOLB Bonding machineChip on Film bonding machine. COF(Chip on Film, Chip on Flex).COF bonding machine is widely used in the TV/laptop/pad panel, it is very popular in the TV/laptop repairing for the LCD/LED/OLED panel bonding. For TV or laptop panel repairing COF bonding machine, has COF on glass bonding and COF on PCB board bonding. The COF Bonding machine also can do COF on flex cable, COF on film bonding, and maybe IC on film bonding. Normal the COF bonding machine is Pulse heating bonding machine with Titanium alloy press bonding head.

COF bonding machine accessories

Our COF bonding machine and all the accessories list for TV/laptop panel repairing as below:

COF bonding machine

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

Please contact us feel free to  purchase the COF bonding machine accessories.

ACF Tape/ACF Film  & Applications

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

ACF Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF TAPE

ACF tape & ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

Teflon Tape ( Teflon cushion)

Similar to Silicone rubber, Teflon tape is often used to provide evenly distributed pressure and temperature on the ACF bonding process.

Features of Teflon Tape :

  1. Superior chemical resistance – hardly affected by acids and alkalis.
  2. Excellent electrical properties, including little dielectric loss, high insulation resistance and breakdown voltage.
  3. Extremely high volume resistivity and remain stable over a wide range of temperature.
  4. Continuous use in a wide range of temperature from -100degC to +260degC
  5. Lowest friction cofficient among all solid materials and excellent self-lubricating ability.
  6. Non-adhesiveness and mold releasing property
  7. Excellent weather and moisture resistance
  8. Superior flame resistance

ACF Remover

ACF REMOVER

ACF REMOVER G450/G550/G650/G750

ACF Remover is a solvent designed to removed hardened ACF during rework of LCD module assembly. have many model number as: G430,G450,G550,G650,G750

ACF Remover Removing Process :

  1. Apply ACF Remover on the FPC/COG
  2. Wait 3~5 minutes for ACF Remover to react and soften ACF bond
  3. Remove ACF after 3~5 minutes
  4. Cleaning with aqueous liquid or acetone

Buy machine, send all the accessories free.

1COF bonding machine  
2ACF  AC-7206-18  1.5*50M  Glass side ACF胶带
3ACF AC-2056R-35  2.0*50M PCB side ACF胶带
4ACF Removing Liquid  G-450  1000ML ACF去除液 G450
5Acetone Liquid BT-H1-500ML  丙酮
6Hitachi Blue Glue  100ML 蓝色胶水
7Fuji Silicone  50M 硅胶皮
8Teflon  50M 铁氟龙
9Alcohol  酒精
10Heating Solder Iron 30W +T-Type Soldering Tips T型烙铁+硅胶条
11Removing Wind Station Hot Air Gun 825+Fan 除风站 热风枪
12Optical Microscope 显微镜
13TAB Cutter   COF切刀
14Correction table   校正表
15LVDS                     LVDS接头
16LCD Test Board   LCD测试板
17Allen Key 六角扳手
18Air Compressor  OTS550 空压机
19Static Wipe Cloth 静电擦拭布
20Cotton swabs 棉签
21Handheld Magnifier 手持放大镜
22Precision Tweezers 精密镊子
23Nano Sponge 纳米海绵
24quatz bar spare one 备用石英条
25Alcohol bottles 空酒精瓶
COF bonding machine accessories

COF bonding machine accessories

Welcome to buy the COF bonding machine and all the COF bonding machine accessories.

OLED panel bonding machine

OLED panel bonding machine, is for AMOLED panel produce and repair machine for TV/Cell phone/Watch/other AMOLED products.  bonding the COFs on the OLED panel and flexible FPCs.


What is OLED?

ACF bonding machine | COF Bonding machine | TAB bonding machine | OLB bonding machine | PCB bonding machine | FPC bonding machine | COG bonding machine | FOG bonding machine

An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphoneshandheld game consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row (and line) in the display is controlled sequentially, one by one,whereas AMOLED control uses a thin-film transistor backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight.

OLED Advantages

The different manufacturing process of OLEDs has several advantages over flat panel displays made with LCD technology.

Lower cost in the future

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing, theoretically making them cheaper to produce than LCD or plasma displays. However, fabrication of the OLED substrate is currently more costly than that of a TFT LCD. Roll-to-roll vapor-deposition methods for organic devices do allow mass production of thousands of devices per minute for minimal cost; however, this technique also induces problems: devices with multiple layers can be challenging to make because of registration – lining up the different printed layers to the required degree of accuracy.

Lightweight and flexible plastic substrates

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)can be used, the displays may be produced inexpensively. Furthermore, plastic substrates are shatter-resistant, unlike the glass displays used in LCD devices.

Better picture quality

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

Better power efficiency and thickness

LCDs filter the light emitted from a backlight, allowing a small fraction of light through. Thus, they cannot show true black. However, an inactive OLED element does not produce light or consume power, allowing true blacks. Removing the backlight also makes OLEDs lighter because some substrates are not needed. When looking at top-emitting OLEDs, thickness also plays a role when talking about index match layers (IMLs). Emission intensity is enhanced when the IML thickness is 1.3–2.5 nm. The refractive value and the matching of the optical IMLs property, including the device structure parameters, also enhance the emission intensity at these thicknesses.

Response time

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1 msfor their fastest color transition, and are capable of refresh frequencies as high as 240 Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,putting conservative estimates at under 10 μs (0.01 ms), which could theoretically accommodate refresh frequencies approaching 100 kHz (100,000 Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

Shenzhen Olian OLED panel bonding machine

Shenzhen Olian Automatic Equipment have the OLED bonding machine for AMOLED screens.

if you need the machine for the OLED screen repairing, please contact us .

OLED panel bonding machine- ACF attaching machine

ACF-ATTACHING-MACHINE

OLED panel bonding machine- COF Pre-bonding machine

FPC bonding machine


OLED panel bonding machine- COF Final-bonding machine

ACF bonding machine|COF Bonding machine|TAB bonding machine|OLB bonding machine|PCB bonding machine|FPC bonding machine|COG bonding machine|FOG bonding machine|

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our OLED bonding machine.

OLED-BONDING-machine

LCD-bonding-machine

All the LCD bonding machines ,welcome you visit us-Shenzhen Olian(Professional in design&making all kinds of bonding machines)

LCD Bonding machine
Bonding machine

OLED panel Bonding Machine

OLED panel Bonding Machine

OLED panel bonding machine, is for AMOLED panel produce and repair machine for TV/Cell phone/Watch/other AMOLED products.  bonding the COFs on the OLED panel and flexible FPCs.


What is OLED?

ACF bonding machine | COF Bonding machine | TAB bonding machine | OLB bonding machine | PCB bonding machine | FPC bonding machine | COG bonding machine | FOG bonding machine

An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphoneshandheld game consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row (and line) in the display is controlled sequentially, one by one,whereas AMOLED control uses a thin-film transistor backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight.

OLED Advantages

The different manufacturing process of OLEDs has several advantages over flat panel displays made with LCD technology.

Lower cost in the future

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing, theoretically making them cheaper to produce than LCD or plasma displays. However, fabrication of the OLED substrate is currently more costly than that of a TFT LCD. Roll-to-roll vapor-deposition methods for organic devices do allow mass production of thousands of devices per minute for minimal cost; however, this technique also induces problems: devices with multiple layers can be challenging to make because of registration – lining up the different printed layers to the required degree of accuracy.

Lightweight and flexible plastic substrates

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)can be used, the displays may be produced inexpensively. Furthermore, plastic substrates are shatter-resistant, unlike the glass displays used in LCD devices.

Better picture quality

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

Better power efficiency and thickness

LCDs filter the light emitted from a backlight, allowing a small fraction of light through. Thus, they cannot show true black. However, an inactive OLED element does not produce light or consume power, allowing true blacks. Removing the backlight also makes OLEDs lighter because some substrates are not needed. When looking at top-emitting OLEDs, thickness also plays a role when talking about index match layers (IMLs). Emission intensity is enhanced when the IML thickness is 1.3–2.5 nm. The refractive value and the matching of the optical IMLs property, including the device structure parameters, also enhance the emission intensity at these thicknesses.

Response time

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1 msfor their fastest color transition, and are capable of refresh frequencies as high as 240 Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,putting conservative estimates at under 10 μs (0.01 ms), which could theoretically accommodate refresh frequencies approaching 100 kHz (100,000 Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

Shenzhen Olian OLED panel bonding machine

Shenzhen Olian Automatic Equipment have the OLED bonding machine for AMOLED screens.

if you need the machine for the OLED screen repairing, please contact us .

OLED panel bonding machine- ACF attaching machine

ACF-ATTACHING-MACHINE

OLED panel bonding machine- COF Pre-bonding machine

FPC bonding machine


OLED panel bonding machine- COF Final-bonding machine

ACF bonding machine|COF Bonding machine|TAB bonding machine|OLB bonding machine|PCB bonding machine|FPC bonding machine|COG bonding machine|FOG bonding machine|

Welcome  you visit us if you do the  OLED edge screen/curved screen/full screen(Huawei Mate10,Mate 20,8X,OPPO/VIVO/MI/Samsung S6 S8 S9/Apple X MAX R etc.) repairing and produce business ,please contact us and test our OLED bonding machine.

OLED-BONDING-machine

OLED-panel-bonding-machine

All the bonding machines ,welcome you visit us-Shenzhen Olian(Professional in design&making all kinds of bonding machines)

Bonding machine parts

Bonding machine parts

In the bonding machine, we need to use many kinds of parts,

Bonding Machine Parts Photos

bonding machine parts
bonding machine parts
bonding machine parts
bonding machine parts
bonding machine parts
bonding-machine-working-videos
bonding-machine-working-videos

All kinds of parts assembled to the bonding machines.

We are design and make all the machines, we select and test all the parts,and use the best parts for our machines.

if you need any parts ,please contact us..

About Us-Olian

Shenzhen Olian Automatic Equipment Co., Ltd (Olian) is a high-tech manufacturer established in 2008, professional specialized in R&D, manufacturing and sales of LCD/LED/OLED module automatic bonding machines and other equipments

Olian insist on the product concept of ” High quality, High efficiency”, have successfully developed standard and custom products:

Olian Design&Make the best and latest LCD/LED/OLED COG/FOG/FOB/FOF/FPC/OLB/ACF/COF/TAB Bonding Machine for TV/Cell phone/Laptop/Pad/Watch/Touch Screens. All the repairing and produce automatic machines/equipements/tools,and all the parts,accessories.

1. LCD/LED/OLED module machines:

Large, medium and small size COG machine, Semi-automatic COG machine, Automatic COG machine, ACF attach machine, IC bonding machine, COG pre-bonding machine, COG main-bonding machine, FOB bonding machine, FOG bonding machine, FPC bonding machine, SMT machine, Tear film machine, detection device, PLASMA, LCD clearing machine;

Auxiliary equipment: IC disassembling machine, ACF split machine, Molybdenum wire machine, Heating platform, Manual or pneumatic test stand, etc;

2.Capacitive screen Touch screen device:

G + F laminating machine, G + G vacuum laminating machine, Touch screen ACF attach machine, Touch screen FOG, Hot press machine, PETOCA laminating machine, F + F, Automatic laminating machine, TP protective film laminating machine

3.Large size LCD/LED/OLED Equipments:

TV repair machines:12-100inch COF bonding machine, LCD laser repair machine, LCD polarizer film repair machine,12-100 inch ACF attaching machine, COF bonding machine, PCB bonding machine, COF Pre-bonding machine, OLB Bonding machine;

4. Cell phone LCD/OLED repair machines:

LCD separate machine, LCD film machine, LCD laminating machine, LCD bubble remove machine, and other tools.

5. Accessories ,Parts and maintenance of the LCD module and TP equipment:

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning sponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC ,all kinds of bonding press head( SU440C bonding head, Tungsten steel bonding head, Titanium alloy press head) production and maintenance, grinding or design and others,

Olian welcome customers to visit our company for technical exchange and business negotiation. Olian will do the best to provide you with high quality equipment and satisfactory service. Olian determined to become the leading brands of the smart automatic equipment bonding machine industry.

Olian Welcome agents and resellers from around the world,

Welcome OEM&ODM for you.

www.szoulian.com

FOG-bonding-machine

Flex Cable Bonding Machine

Flex cable bonding machine

The flex cable bonding machine also named FOG(flex-on-glass) bonding machine, FOB(flex-on-PCB Printed Circuit Board) /FOF(flex-on-film) / FPC(Flexible Printed Circuit ) /Flex bonding /Flex cable bonding machine.

About

Bonding machine

The Bonding Machine may consist of HD Digital Microscope, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process.

The bonding press head may press the FPC onto the Glass/PCB/FPC/Film using ACF conductive adhesive as medium, by a certain temperature, pressure and time. also some bonding machine use the Solder paste as the medium.

The bonding machine is widely used for Cell phone, Touch display, Watch, Pad, Tablet, LCD/LED/OLED panels repairing.

Classify

According to the different heating types, it have pulse heating and Constant temperature flex cable bonding machine.

The machines have single press head , double press heads, triple press heads, Quadruple press heads machine, and rotary table flex cable bonding machines.

About Shenzhen Olian

Shenzhen Olian Automatic Equipment Co., Ltd (Olian) is a high-tech manufacturer established in 2008, professional specialized in R&D, manufacturing and sales of LCD/LED/OLED module automatic bonding machines and other equipments

Olian insist on the product concept of ” High quality, High efficiency”, have successfully developed standard and custom products:

Olian Design&Make the best and latest COG/FOG/FOB/FOF/FPC/OLB/ACF/COF/TAB Bonding Machine for TV/Cell phone/Laptop/Pad/Watch/Touch Screens

Olian Main products: TV/Laptop/PAD/Cell phone/Watch/Touch screen/Display repairing machine, LCD/LED/OLED bonding machine, LCM produce machine, LCD/LED/OLED repair machine, and all the bonding machines, parts, tool, accessories .

Olian machines SPEC

Specifications:

  1. Model Number:FC006/FC007/FP008/FP009
  2. Product Name: Upper and/or Down Contraposition movable platform Flex Cable Bonding Machine
  3. Suitable For: Suitable for alignment and press FPC to the LCD Panel glass or PCB or COF which attached ACF film
  4. Size Range:1~12 inch
  5. Attach Precision:±0.015mm
  6. Machine Capacity:3000-6000pcs/day (12S/pc)
  7. Power Supply: 220V±10%,50HZ,1200W
  8. Air Supply:0.5~0.7MPa,dry air
  9. Platform Size:L90*W60 MM
  10. Platform Precision:±0.01MM
  11. Temp Range:1~350℃
  12. Time Range:1~99.9sec
  13. Product Size:W850*D800*H1460MM
  14. N.W:About 200-350KG

Features

*Constant temperature heating system/Pulse heating system
*Panasonic PLC Control system
*Human – Machine interface
*Automatic temperature alarm
*Press Head Level Adjustable Device
*Down Contraposition HD Colorful CCD and 10.4 inch HD LCD
*Manual / automatic switching
*Imported electrical configuration
*apply for all the LCD,LED,ONCELL,OLED panels.

Pictures

flex cable bonding machine

flex cable bonding machine
flex cable bonding machine
flex cable bonding machine
flex cable bonding machine

Welcome you visit us if you have interest in our products。

www.bonding-machine.com

QQ:2307972393

Wechat/whatsapp:+86 18025364779

ACF bonding process

ACF bonding process

ACF bonding process

ACF bonding process ,is the process of Chip ic/COF ic/FPC bonded to the LCD(Glass)/PCB/Film/FPC/ ,use the ACF tape as the medium connecting materials,use the hot bar/bonding head as the source of the heat and pressure,use the tooling as the holder,and the silicone rubber or teflon as the Cushioning material, all the ACF bonding process finished by the ACF bonding equipments.

ACF tape has little conductive particles in the conductive lines of the tape. 

acf bonding process

During ACF bonding, a combination of heat & pressure is applied on to chip (FPC/IC) for an appropriate time.

Conductive particles (each 3~30um) are compressed between IC and substrate (glass / PCB) while insulating materials pushed away.

This allows the compressed Ni-Au layer on the particles to conduct electricity between the IC and the substrates (z-axis).

The insulated particles are distributed with a minimum chance of electrical shorting in the x-axis and y-axis.

As the epoxy cures and conductive particles are trapped into permanent compressed form.

The compressed particles, by its elastic nature, are constantly pushing outwards to maintain good electrical conductivity under different environmental conditions. 

This process is what produces the connection between the ACF tape and the components.  Advanced Integrated Technologies is equipped to assist you with your ACF bonding process.

ACF bonding process sorts and conditions:

acf bonding process
ACF bonding process

According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the important medium of the ACF bonding process.

ACF Tape/ACF Film-ACF bonding process materials

ACF TAPE

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

-Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

-Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF tape/ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

Some ACF models:

Model(Hitachi)Process typeFor Glass
AC-823CY  W1.2mm  L100mCOG Low TempThin Glass
AC-823CY  W1.5mm  L100mCOG Low TempThin Glass
AC-823CY  W2.0mm  L100mCOG Low TempThin Glass
AC-8412KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-832L  W1.2mm  L100mCOG Low TempThin Glass
AC-832L  W1.5mm  L100mCOG Low TempThin Glass
AC-832L W2.0mm  L100mCOG Low TempThin Glass
AC-832L W2.5mm  L100mCOG Low TempThin Glass
AC-8622KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-7813KM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W2.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W2.0mm  L100mFOG Low TempCommon Glass
MF-331-25 W2.0mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.5mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.2mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.0mm  L50mFOG Low TempFor Touch Screen
AC-4255KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-3514-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7206U-18  W1.0mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.2mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.5mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W2.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.5mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W2.0mm  L50mFOG Normal TempCommon Glass
AC-9851YM-35  W1.5mm  L50mFOG Low TempCommon Glass
AC-9851YM-35  W2.0mm  L50mFOG Low TempCommon Glass
AC-896C  W1.5mm  L100mCOG Low TempThin Glass
Model(Sony)Process typeFor Glass
CP6920F3  W3.5mm  L50m COG Low TempCommon Glass
CP6920F3  W3.0mm  L50m COG Low TempCommon Glass
CP6920F3  W2.0mm  L50mCOG Low TempCommon Glass
CP6920F3  W1.5mm  L50m  COG Low TempCommon Glass
CP6920F3  W1.2mm  L50m  COG Low TempCommon Glass
CP34531  W1.5mm  L100m  COG Low TempThin Glass
CP34531  W2.0mm  L100m  COG Low TempThin Glass
CP36531  W1.5mm  L100m  COG Low TempThin Glass
CP36531  W2.0mm  L100m  COG Low TempThin Glass
CP35231  W1.5mm  L100m  COG Low TempThin Glass
CP35231  W2.0mm  L100m  COG Low TempThin Glass
CP36931  W1.5mm  L100m  COG Low TempThin Glass
CP36931  W2.0mm  L100m  COG Low TempThin Glass
CP33731  W1.5mm  L100m  COG Low TempThin Glass
CP33731  W2.0mm  L100m  COG Low TempThin Glass
CP31831  W1.5mm  L100m  COG Low TempThin Glass
CP31831  W2.0mm  L100m  COG Low TempThin Glass
CP1220  W1.0mm  L100m  FOG Low TempCommon Glass
CP1220  W1.2mm  L100m  FOG Low TempCommon Glass
CP1220  W1.5mm  L100m  FOG Low TempCommon Glass
CP1220  W2.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.2mm  L100m  FOG Low TempCommon Glass
CP13941  W1.5mm  L100m  FOG Low TempCommon Glass
CP13941  W2.0mm  L100m  FOG Low TempCommon Glass
CP6920F W3.5mm  L50m COG Low TempCommon Glass
CP6920F W3.0mm  L50m COG Low TempCommon Glass
CP6920F W2.0mm  L50mCOG Low TempCommon Glass
CP6920F W1.5mm  L50m  COG Low TempCommon Glass
CP6920F W1.2mm  L50m  COG Low TempCommon Glass
CP920  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP920  W2.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP923  W2.0mm  L100m  FOG Low TempFor Touch Screen
AC-7813KM specification

ACF tape data sheet(for example:7206U/2056R)

ACF hot bar/ACF bonding head-ACF bonding process heat and pressure source

The source for heat and pressure in ACF bonding process is most often a hot bar/thermode/bonding head/bonding cutter.

Hot bar bonding systems are designed to heat the hot bar to a specific temperature using low voltage electricity, which temperature is fed back to the controller via a thermocouple. 

Tooling is designed to hold the components and position the ACF tape to line up correctly with the conductive pads on the PCB or other component. 

The hot bar is then brought into contact with the ACF film over the top of the bonding pad, heated to the bonding temperature, and held for a specified time. 


Tell us which products you want to bonding ,then we can suggest you the right ACF bonding equipments for you ..

ACF Bonding Equipment Applications

ACF bonding equipment has been used in glass display applications for many years.  It has recently become widely used in COF, COB,COG,FOG,FOB,FOF areas.  

ACF bonding equipment

Industries that use this technology most are the mobile phone manufacturing, automotive industry, and LCD production, mobile computers, TV manufacturing, open cell panels factories, touch panel ,AD shower, Watch, Pad… factories. and  many Labs who researching in the LCD/LED/OLED/MICRO LED/MINI LED displays industries.

  • TAB Bonding (TCP-PCB / TCP-LCD)
  • COG Bonding (IC-LCD)
  • COB Bonding (IC-PCB)
  • COF Bonding (COF-LCD/PCB)
  • FOG Bonding(FPC-LCD)
  • FOB Bonding(FPC-PCB)
  • FOF Bonding(FPC-FPC)
  • Plasma Display (FPC-PDP)
  • Flip Chip Package
  • ……

ACF Bonding equipment Features

  • Heat cure
  • Fast bonding time
  • High adhesion to plastic PET,COF & FPC, substrate
  • Excellent thermal stability
  • Good contact resistance for reliability
  • Good corrosion resistance
  • Excellent chemical resistance
  • Good for wide bonding temperature range
  • Replaces solder for lead-free solution

Silicon rubber and Teflon

Teflon Tape ( Teflon cushion)

Similar to Silicone rubber, Teflon tape is often used to provide evenly distributed pressure and temperature on the ACF bonding process.

Features of Teflon Tape :

1. Superior chemical resistance – hardly affected by acids and alkalis.

2. Excellent electrical properties, including little dielectric loss, high insulation resistance and breakdown voltage.

3. Extremely high volume resistivity and remain stable over a wide range of temperature.

4. Continuous use in a wide range of temperature from -100degC to +260degC

5. Lowest friction cofficient among all solid materials and excellent self-lubricating ability.

6. Non-adhesiveness and mold releasing property

7. Excellent weather and moisture resistance

8. Superior flame resistance

Shenzhen olian is a professional ACF bonding equipment design&making factory, We know all the ACF bonding process, we also offer all the bonding machine accessories and parts. Welcome you visit us .

Wechat/whatsapp:+86 18025364779, QQ:2307972393, https://bonding-machine.com

ACF Bonding equipment
FOB BONDER

ACF Bonding equipment

ACF bonding Equipment and the ACF bonding process

The Bonding Equipment use the ACF tape as the medium ,so it also named ACF bonding equipment /ACF bonding machine.According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the important medium of the ACF bonding process.

ACF Tape/ACF Film

ACF TAPE

ACF Tape is normally made up of two main components, namely Adhesive & conductive particles.

-Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

-Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF tape/ACF Anisotropic Conductive Film

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

ACF bonding process

ACF tape has little conductive particles in the conductive lines of the tape. 

During ACF bonding, a combination of heat & pressure is applied on to chip (FPC/IC) for an appropriate time.

Conductive particles (each 3~30um) are compressed between IC and substrate (glass / PCB) while insulating materials pushed away.

This allows the compressed Ni-Au layer on the particles to conduct electricity between the IC and the substrates (z-axis).

The insulated particles are distributed with a minimum chance of electrical shorting in the x-axis and y-axis.

As the epoxy cures and conductive particles are trapped into permanent compressed form.

The compressed particles, by its elastic nature, are constantly pushing outwards to maintain good electrical conductivity under different environmental conditions. 

About the ACF hot bar/bonding head.

The source for heat and pressure in ACF bonding is most often a hot bar/thermode/bonding head/bonding cutter.

Hot bar bonding systems are designed to heat the hot bar to a specific temperature using low voltage electricity, which temperature is fed back to the controller via a thermocouple. 

Tooling is designed to hold the components and position the ACF tape to line up correctly with the conductive pads on the PCB or other component. 

The hot bar is then brought into contact with the ACF film over the top of the bonding pad, heated to the bonding temperature, and held for a specified time. 

This process is what produces the connection between the ACF tape and the components.  Advanced Integrated Technologies is equipped to assist you with your ACF bonding process.

Tell us which products you want to bonding ,then we can suggest you the right ACF bonding equipments for you ..

ACF Bonding Equipment Applications

ACF bonding equipment has been used in glass display applications for many years.  It has recently become widely used in COF, COB,COG,FOG,FOB,FOF areas.  

ACF bonding equipment

Industries that use this technology most are the mobile phone manufacturing, automotive industry, and LCD production, mobile computers, TV manufacturing, open cell panels factories, touch panel ,AD shower, Watch, Pad… factories. and  many Labs who researching in the LCD/LED/OLED/MICRO LED/MINI LED displays industries.

  • TAB Bonding (TCP-PCB / TCP-LCD)
  • COG Bonding (IC-LCD)
  • COB Bonding (IC-PCB)
  • COF Bonding (COF-LCD/PCB)
  • FOG Bonding(FPC-LCD)
  • FOB Bonding(FPC-PCB)
  • FOF Bonding(FPC-FPC)
  • Plasma Display (FPC-PDP)
  • Flip Chip Package
  • ……

ACF Bonding equipment Features

  • Heat cure
  • Fast bonding time
  • High adhesion to plastic PET,COF & FPC, substrate
  • Excellent thermal stability
  • Good contact resistance for reliability
  • Good corrosion resistance
  • Excellent chemical resistance
  • Good for wide bonding temperature range
  • Replaces solder for lead-free solution

Shenzhen olian is a professional ACF bonding equipment design&making factory. Welcome you visit us .

Wechat/whatsapp:+86 18025364779, QQ:2307972393, https://bonding-machine.com

ACF Bonding equipment
Bonding machine

Shenzhen Olian Bonding Machine Catalog Download

Shenzhen Olian Bonding Machine Catalog Download

About Us-Olian

shenzhen olian bonding machine

Shenzhen Olian Automatic Equipment Co., Ltd (Olian) is a high-tech manufacturer established in 2008, professional specialized in R&D, manufacturing and sales of LCD/LED/OLED module automatic bonding machines and other equipments

Olian insist on the product concept of ” High quality, High efficiency”, have successfully developed standard and custom products:

Olian Design&Make the best and latest LCD/LED/OLED COG/FOG/FOB/FOF/FPC/OLB/ACF/COF/TAB Bonding Machine for TV/Cell phone/Laptop/Pad/Watch/Touch Screens. All the repairing and produce automatic machines/equipements/tools,and all the parts,accessories.

1. LCD/LED/OLED module machines:

Large, medium and small size COG machine, Semi-automatic COG machine, Automatic COG machine, ACF attach machine, IC bonding machine, COG pre-bonding machine, COG main-bonding machine, FOB bonding machine, FOG bonding machine, FPC bonding machine, SMT machine, Tear film machine, detection device, PLASMA, LCD clearing machine;

Auxiliary equipment: IC disassembling machine, ACF split machine, Molybdenum wire machine, Heating platform, Manual or pneumatic test stand, etc;

2.Capacitive screen Touch screen device:

G + F laminating machine, G + G vacuum laminating machine, Touch screen ACF attach machine, Touch screen FOG, Hot press machine, PETOCA laminating machine, F + F, Automatic laminating machine, TP protective film laminating machine

3.Large size LCD/LED/OLED Equipments:

TV repair machines:12-100inch COF bonding machine, LCD laser repair machine, LCD polarizer film repair machine,12-100 inch ACF attaching machine, COF bonding machine, PCB bonding machine, COF Pre-bonding machine, OLB Bonding machine;

4. Cell phone LCD/OLED repair machines:

LCD separate machine, LCD film machine, LCD laminating machine, LCD bubble remove machine, and other tools.

5. Accessories ,Parts and maintenance of the LCD module and TP equipment:

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning sponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC ,all kinds of bonding press head( SU440C bonding head, Tungsten steel bonding head, Titanium alloy press head) production and maintenance, grinding or design and others,

Olian welcome customers to visit our company for technical exchange and business negotiation. Olian will do the best to provide you with high quality equipment and satisfactory service. Olian determined to become the leading brands of the smart automatic equipment bonding machine industry.

Olian Welcome agents and resellers from around the world,

Welcome OEM&ODM for you.

Bonding machine working videos

Bonding machine working videos

Some of our bonding machine working videos for your reference.

Bonding Machine, is the widely used machine in the LCD/LED/OLED, LCM/open cell/panel/screen/display produce factories and repairing service shops all over the world.

Our bonding machines,

Shenzhen olian all kinds of bonding machines

The Bonding Machine is based on the recent innovations as well as planned to repair the arrangements of LCD, LED,OLED, TV/television, Laptop, Pad, Cell phone, Watch, Touch Panel, Ad Player, and all the flat and edge screens.

The Bonding Machine may consist of HD Digital Microscope, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process. The bonding press head may press the IC/FPC/COF onto the LCD/LED/OLED Glass/PCB/FPC using ACF conductive adhesive as medium, by a certain temperature, pressure and time. also some bonding machine use the Solder paste as the medium.

Full automatic LCD making produce line:

Automatic machines: Glass cutting +Glass Grinding+Glass Cleaning+COG bonding+FOG bonding+Back light assembling

Glass cutting machine

Glass grinding and cleaning machine      

COG bonding +FOG bonding machine        

LCD back light assembling machine

Edge OLED screen full automatic bonding machine:

A small LCM factory bonding machines from Olian.

A Small LCM factory Semi-automatic bonding machines

Full automatic COG FOG bonding machines working videos Demo

Full automatic FOB bonding machine working videos
full automatic COG bonding machine working videos

15.6inch LCD bonding machines working videos:

Single side multi-segments ACF attaching machine working videos
15.6inch Single side multi-segments FOB bonding machines working video

ACF attaching machine working videos

ACF attaching on the glass ,ACF attaching on the PCB, ACF attaching on COF/FPC

3M Double-Sided Adhesive Attaching Machine


3M Double-Sided Adhesive Attaching Machine,PCB board attach double-sided adhesive machine

COF pre-bonding machine

COF pre-bonding machine for mobilephone

COG pre-bonding machine


COG pre-bonding ,IC pre-bonding on the glass

COG Main-bonding machine working videos


COG main-bonding ,IC main-bonding on the glass

COG bonding machine(full automatic)


Full automatic COG bonding machine ,glass cleaning, IC loading, ACF attaching,IC Pre-bonding,IC main-bonding,output…

Full automatic COG bonding machine ,glass cleaning, IC loading, ACF attaching,IC Pre-bonding,IC main-bonding,output…

FOG bonding machine working videos


FOG bonding machine,FPC bonding on glass

FOG full automatic bonding machine


FOG bonding machine(Rotary model)


FOG bonding machine(Rotary model)

IC disassembling machine


IC disassembling from the glass
IC disassembling working videos

Plasma cleaner video

COF bonding machine for TV repairng

COF bonding machine working video for repairing machine
COF bonding machine for 86inch panel for produce

COF bonding machine accessories

Our COF bonding machine and all the accessories list for TV/laptop panel repairing as below:

We also offer all the accessories: ACF tapes, ACF Remover, Blue glue, Acetone, Alcohol ,Customized bonding head, Quartz glass, Silicone tape, Teflon tape, Microscope, Air Compressor, COF cutter, Cleaning nanosponge, Cleaning clothes wiper, Ear buds, Pump bottles, T-bit, T-rubber, T-Iron, Magnifier lens, Allen key, Precision tweezers, Soldering Stations, Removing Wind Station Hot Air Gun, LEDS,LVDS cables, LCD Test Board, LCD/LED Tester.RT809H programmer, Open cell, Polarizer, Backlight ,T-Con Board, Main-board, IC, TAB COF IC and others.

COF/TAB/ACF bonding machine

Small LCM making factory visiting video:

Shenzhen Olian welcome you visit us for more training if you want to buy any bonding machines.