• +86 18025364779
  • olian@szolian.com

标签归档ACF FILE

ACF Tape

ACF TAPE/ACF FILM

ACF Tape/ACF Film is normally made up of two main components, namely Adhesive & conductive particles.

What is ACF tape/ACF Film?

Adhesives

The adhesive composition is dependent on the materials being assembled. This means an ACF designed for use in a flex-on-glass (FOG) assembly is usually not suitable for use in a chip-on-glass (COG),chip-on-film(COF), flex-on-board(FOB),flex-on-flex(FOF) or any other configurations. It is specific to the application for which it is designed for.

Conductive Particles

Conductive particles are used to conduct electricity from one side of the bond to the other. Depending on the application, conductive particles range from 3.5μm to 30μm in size, and can be made from Nickel-gold plated polymer spheres, gold plated nickel particles, or lead-free solder materials. Particles may be individually coated with a outer polymer to insulate them from other uncrushed particles, but which will crack open and allow electrical conduction if the particle is trapped and crushed between two pads during assembly.

ACF tape/ACF Anisotropic Conductive Film

ACF TAPE
ACF TAPE
ACF TAPE

ACF (Anisotropic conductive film) or ACF tape is an epoxy adhesive system used by electronics industry to make electrical and mechanical connections from drive electronics to substrates.

ACF are filled with conductive particles which provides electrical interconnection between pads through the film thickness (z-direction).

The conductive particles are distributed far apart thus not electrically conductive in the plane direction (X&Y) of the film.

ACF interconnect offers cost savings by substituting conventional mechanical connectors or soldering interconnect.

ACF interconnect allows low height and fine pitch which enables high density and miniaturizing of assembly.

ACF special conductive particle is made from environmental friendly material (ROHs compliance). It provides good metalic bonding.

According to different LCD/LED/OLED and different screens, there are many ACF tapes models.  ACF tape is the import medium of the bonding process.

What is ACF Bonding?

During ACF bonding, a combination of heat & pressure is applied on to chip (FPC/IC) for an appropriate time.

Conductive particles (each 3~30um) are compressed between IC and substrate (glass / PCB) while insulating materials pushed away.

This allows the compressed Ni-Au layer on the particles to conduct electricity between the IC and the substrates (z-axis).

The insulated particles are distributed with a minimum chance of electrical shorting in the x-axis and y-axis.

As the epoxy cures and conductive particles are trapped into permanent compressed form.

The compressed particles, by its elastic nature, are constantly pushing outwards to maintain good electrical conductivity under different environmental conditions. 

Some ACF tape models

Model(Hitachi)Process typeFor Glass
AC-823CY  W1.2mm  L100mCOG Low TempThin Glass
AC-823CY  W1.5mm  L100mCOG Low TempThin Glass
AC-823CY  W2.0mm  L100mCOG Low TempThin Glass
AC-8412KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8412KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8412KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-832L  W1.2mm  L100mCOG Low TempThin Glass
AC-832L  W1.5mm  L100mCOG Low TempThin Glass
AC-832L W2.0mm  L100mCOG Low TempThin Glass
AC-832L W2.5mm  L100mCOG Low TempThin Glass
AC-8622KZ  W1.2mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.5mm  L50mCOG Low TempThin Glass
AC-8622KZ  W1.8mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.0mm  L50mCOG Low TempThin Glass
AC-8622KZ  W2.3mm  L50mCOG Low TempThin Glass
AC-7813KM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813KM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.0mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.2mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W1.5mm  L100mFOG Low TempCommon Glass
AC-7246KU-20  W2.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7813YM-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-7823YM-25  W2.0mm  L100mFOG Low TempCommon Glass
MF-331-25 W2.0mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.5mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.2mm  L50mFOG Low TempFor Touch Screen
MF-331-25 W1.0mm  L50mFOG Low TempFor Touch Screen
AC-4255KU-18  W1.0mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.2mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W1.5mm  L100mFOG Low TempCommon Glass
AC-4255KU-18  W2.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.0mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.2mm  L100mFOG Low TempCommon Glass
AC-3514-25  W1.5mm  L100mFOG Low TempCommon Glass
AC-3514-25  W2.0mm  L100mFOG Low TempCommon Glass
AC-7206U-18  W1.0mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.2mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W1.5mm  L50mFOG Normal TempCommon Glass
AC-7206U-18  W2.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.0mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W1.5mm  L50mFOG Normal TempCommon Glass
AC-2056R-35  W2.0mm  L50mFOG Normal TempCommon Glass
AC-9851YM-35  W1.5mm  L50mFOG Low TempCommon Glass
AC-9851YM-35  W2.0mm  L50mFOG Low TempCommon Glass
AC-896C  W1.5mm  L100mCOG Low TempThin Glass
Model(Sony)Process typeFor Glass
CP6920F3  W3.5mm  L50m COG Low TempCommon Glass
CP6920F3  W3.0mm  L50m COG Low TempCommon Glass
CP6920F3  W2.0mm  L50mCOG Low TempCommon Glass
CP6920F3  W1.5mm  L50m  COG Low TempCommon Glass
CP6920F3  W1.2mm  L50m  COG Low TempCommon Glass
CP34531  W1.5mm  L100m  COG Low TempThin Glass
CP34531  W2.0mm  L100m  COG Low TempThin Glass
CP36531  W1.5mm  L100m  COG Low TempThin Glass
CP36531  W2.0mm  L100m  COG Low TempThin Glass
CP35231  W1.5mm  L100m  COG Low TempThin Glass
CP35231  W2.0mm  L100m  COG Low TempThin Glass
CP36931  W1.5mm  L100m  COG Low TempThin Glass
CP36931  W2.0mm  L100m  COG Low TempThin Glass
CP33731  W1.5mm  L100m  COG Low TempThin Glass
CP33731  W2.0mm  L100m  COG Low TempThin Glass
CP31831  W1.5mm  L100m  COG Low TempThin Glass
CP31831  W2.0mm  L100m  COG Low TempThin Glass
CP1220  W1.0mm  L100m  FOG Low TempCommon Glass
CP1220  W1.2mm  L100m  FOG Low TempCommon Glass
CP1220  W1.5mm  L100m  FOG Low TempCommon Glass
CP1220  W2.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.0mm  L100m  FOG Low TempCommon Glass
CP13941  W1.2mm  L100m  FOG Low TempCommon Glass
CP13941  W1.5mm  L100m  FOG Low TempCommon Glass
CP13941  W2.0mm  L100m  FOG Low TempCommon Glass
CP6920F W3.5mm  L50m COG Low TempCommon Glass
CP6920F W3.0mm  L50m COG Low TempCommon Glass
CP6920F W2.0mm  L50mCOG Low TempCommon Glass
CP6920F W1.5mm  L50m  COG Low TempCommon Glass
CP6920F W1.2mm  L50m  COG Low TempCommon Glass
CP920  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP920  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP920  W2.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.0mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.2mm  L100m  FOG Low TempFor Touch Screen
CP923  W1.5mm  L100m  FOG Low TempFor Touch Screen
CP923  W2.0mm  L100m  FOG Low TempFor Touch Screen


TF-4200EB-45/1000MLBlueLCM Insulation protective adhesive
TF-4200EB-451/1000MLBlueLCM Insulation protective adhesive
TF-4200EB-452/1000MLBlueLCM Insulation protective adhesive
TF-4200EB-75/1000MLBlueLCM Insulation protective adhesive
Model(ACF Remover)
Remover/G-430/1L Clean FPC Sidecommon 
Remover/G-450/1L Thick Clean IC Sidecommon 
Remover/G-450/1L Diluted Clean FPC Sidecommon 
Remover/G-550/1L Thick Clean IC Sidecommon 
Remover/G-550/1L Diluted Clean IC Sidecommon 
Remover/G-650/1L Thick Clean IC Sidecommon 
Remover/G-650/1L Diluted Clean IC Sidecommon 

Please contact us if you need any other ACF tapes and ACF removers.

ACF tape Applications

ACF has for many years, been used in glass display applications. Recently, it is also becoming widely used in TAB,COG,FOG,FOB,FOF,COF,COB areas.

– TAB Bonding (TCP-PCB / TCP-LCD)

– COG Bonding (IC-LCD)

– COB Bonding (IC-PCB)

– COF Bonding (COF-LCD/PCB)

– FOG Bonding(FPC-LCD)

– FOB Bonding(FPC-PCB)

– FOF Bonding(FPC-FPC)

– Plasma Display (FPC-PDP)

– Flip Chip Package

– ……

ACF Bonding Features

  • Heat cure,
  • Fast bonding time,
  • High adhesion to plastic PET,COF & FPC, substrate,
  • Excellent thermal stability,
  • Good contact resistance for reliability,
  • Good corrosion resistance,
  • Excellent chemical resistance,
  • Good for wide bonding temperature range,
  • Replaces solder for lead-free solution.

Because of ACF bonding advantages and features ,the ACF bonding machine is becoming more and more popular and useful.

ACF Bonding Machine

The Bonding Machine use the ACF tape as the medium ,so it named ACF bonding machine.

ACF Bonding Machine, is the widely used machine in the LCD/LED/OLED, LCM/open cell/panel/screen/display produce factories and repairing service shops all over the world.

ACF TAPE
FOG/FOB/FOF bonding machine

The ACF Bonding Machine is based on the recent innovations as well as planned to repair the arrangements of LCD, LED,OLED, TV/television, Laptop, Pad, Cell phone, Watch, Touch Panel, Ad Player, and all the flat and edge screens.

The ACF Bonding Machine may consist of HD Digital Microscope, and also has a Digital Pressure Gauge, and vacuum generator which may help to hold the panel during the bonding process. The bonding press head may press the IC/FPC/COF onto the Glass/PCB/FPC using ACF conductive adhesive as medium, by a certain temperature, pressure and time.

According to the different bonding materials, the ACF bonding machine can be divided into different bonding machines.

COG Bonging machine

COG bonding machine, also name IC Bonding machine, Chips bonding machine, COG(Chip on glass) bonding machine, it is bonding the Chip IC on the glass using ACF conductive adhesive as medium, by a certain temperature, pressure, time, driver IC will be bonded onto the glass. COG bonding machine has COG Pre-Bonding Machine and COG Main-Bonding Machine. They are all constant temperature machines. it maybe have single station ,double stations, three stations, and maybe four stations bonding machine.

COG Pre-bonding machine

COG PRE-BONDING MACHINE

COG Main-Bonding Machine

FOG bonding machine

FOG bonding machine, FOB bonding machine, FPC bonding machine, Flex cable bonding machine.FOG(FPC on glass )or FOB(FPC on PCB Board), FOF(FPC on FPC), also COF on Glass bonding, COF on board bonding, COF on film bonding. It have Pulse Heating Bonding Machines and Constant Temperature Bonding Machines.

FPC bonding machine
FPC bonding machine

ACF attaching machine

ACF attaching machine which is attaching the ACF tape on the Glass/Board/FPC/COF before bonding. it also name ACF machine, ACF attachment machine, ACF Attached machine , ACF bonding machine , ACF pre-paste , ACF equipment , ACF pre-paste machines , ACF pre- affixed equipment, ACF single station machine , ACF multi-station machines and so on.  The attaching machine, also can paste the Double-sided tape.

ACF TAPE
ACF-ATTACHING-MACHINE

Semi-auto LCM making machines

Semi Automatic LCM making machines include:COG pre-bonding machine, COG main-bonding machine , FOG(FOB) bonding machine, ACF attaching machine as below:

LCM making machines
LCM making machines

Full automatic COG bonding machine

Full automatic COG bonding machine, it include the LCD cleaning, IC loading, ACF attaching on the glass, IC pre-bonding, and IC main-bonding processes.

FULL AUTOMATIC COG MACHINES
FULL AUTOMATIC COG MACHINE

Full automatic FOG bonding machine

Full automatic FOG bonding machine, It include the ACF attaching on the glass, FPC loading, FPC bonding on the glass and output to testing..

LCM full automatic produce machine

LCM full automatic produce machine include all the process of the COG and FOG bonding machines.

If you need the ACF bonding machines and the ACF tapes and all the accessories,please contact us Olian .Wechat/whatsapp:+86 18025364779,QQ:2307972393, E-mail:2307972393@qq.com

ACF TAPE
Please follow and like us: