Full automatic bonding machine

Full automatic bonding machine

Full automatic bonding machine, COF/COG/COP FOG/FOB/FOF produce line for mobilephone ,laptops,ipad,watch,HMI LCD Making. Full automatic feeding +cleaning+ACF+COF/COG+FOG/FOB/FOF bonding machines,COF Punching machine,LCD OLED cleaning machine，OLED Flexible screen making machines，OL-FB1000,OL-CB1000,OL-QX1000,OL-CQ1000.

Full automatic bonding machine:

DISPLAY FEEDING MACHINE 显示屏上料机 OL-BS1000

TERMINAL CLEANING MACHINE 端子清洗机  OL-QX1000

FULL AUTOMATIC COG/COF/COP BONDING MACHINE 全自动COG/COF/COP绑定机  OL-CB1000

FULL AUTOMATIC COF PUNCHING MACHINE 全自动COF冲切机  OL-CQ1000

FULL AUTOMATIC TIPPER MACHINE 翻转机  OL-FZ1000

FULL AUTOMATIC FPC FEEDING MACHINE FPC上料机  OL-FS1000

FULL AUTOMATIC FOG/FOF/FOB/T-FOG BONDING MACHINE 全自动FOG/FOF/FOB/T-FOG绑定机 OL-FB1000

Full automatic bonding machine Produce Line COF edge screen making Machines 4 sets machines：

+Full Automatic cleaning machine 全自动端子清洗机 OL-QX1000

+Full Automatic COF punching machine 全自动COF冲裁机 OL-CQ1000

+Full Automatic COG/COF/COP bonding machine 全自动COG/COF/COP绑定机  OL-CB1000

+Full Automatic FOG/FOF/FOB bonding machine 全自动FOG/FOB/FOF绑定机  OL-FB1000

Full automatic lcd making machines include the machines :

Display feeding machine OL-BL1000

Terminal cleaning machine OL-QX1000

Full automatic COG/COF/COP bonding machine OL-CB1000

Full automatic COF punching machine OL-CQ1000

Flip machine OL-FZ1000

FPC feeding machine OL-FS1000

Full automatic FOG/FOF/FOB/T-FOG bonding machine OL-FB1000

Automatic dispenser

Automatic backlight assembly machine

and other machines testers accessories.

显示屏上料机  OL-BL1000

端子清洗机  OL-QX1000

全自动COG/COF/COP绑定机 OL-CB1000

全自动COF冲切机  OL-CQ1000

翻转机  OL-FZ1000

FPC上料机  OL-FS1000

全自动FOG/FOF/FOB/T-FOG邦定机  OL-FB1000

全自动点胶机

全自动背光组装机

Full automatic bonding machine COF/COG/COP bonding line OL-CB1000

全自动COF/COG/COP绑定线 OL-CB1000

1、 设备信息
1.1 设备名称：全自动 COF 兼容 COG 绑定机
1.2 设备型号： CB-1000
1.3 适用于 1″ -7″ 竖屏 LCD 产品，单边单个 COF/COG 的自动 ACF 贴付、 预压和本压要求
1.4 本设备可与本公司其它设备连线使用

2.2 设备动作流程
平台或皮带上料（人工或其它连线机台自动上料） →机械手 0#吸取 LCD 经修正 CCD 校正位
置后放置于 ACF 平台→ACF 平台前进，压头下降，贴付 ACF→ACF 平台后退出料位置→机械
手 1#吸取 LCD→检测 ACF 贴付效果→放置于预压平台/同时 COF 上料机放置 COF 于载台上/
自动供料视觉修正 IC， 预对位后， 移送到压头下方,压头吸取 COF/IC ，进行对位预压→
机械手 2#吸取产品分别放置于本压 3 个平台上进行本压→机械手 3#吸取本压好的 LCD 放
置于下游平台或皮带上

Fully automatic COF/COG/COP bonding line OL-CB1000

1. Equipment information
   1.1 Device name: Fully automatic COF compatible COG binding machine
   1.2 Device model: CB-1000
   1.3 Applicable to 1″ -7″ vertical screen LCD products, and the requirements of automatic ACF attaching, pre-pressing and self-pressing for a single COF/COG on one side
   1.4 This equipment can be connected to other equipment of our company

2.2 Device action flow
Platform or belt feeding (manual or other connected machine automatic feeding) → Manipulator 0# sucking LCD, corrected CCD correction position
Place it on the ACF platform → ACF platform moves forward, the indenter drops, and after attaching to the ACF → ACF platform, it exits the material position → mechanical
Hand 1# absorb LCD→check the ACF paste effect→place it on the pre-compression platform/at the same time the COF feeder places the COF on the carrier/
Automatic feeding visual correction IC, after pre-alignment, move it under the indenter, the indenter sucks COF/IC, and performs alignment pre-compression →
Robot 2# sucked products are placed on the 3 platforms of the press to perform the original pressing → Robot 3# sucks the pressed LCD release
Place on the downstream platform or belt.

Full automatic bonding machine FOG/FOB/FOF bonding line OL-FB1000

全自动FOG/FOB/FOF绑定线  OL-FB1000

1、设备及公司信息
1.1 设备名称： 全自动 FOG 绑定机
1.2 设备型号： FB-1000
1.3 适用于 1″ -7″ LCD 竖屏产品，单边单个 FPC 的自动 ACF 贴付、对位和热压要求
1.4 本设备可与本司设备连线使用

1.5 公司名称： 深圳市欧联自动化设备有限公司
1.6 公司地址：深圳市宝安区福永龙王庙工业区 62 栋
1.7 TEL： 0755-23209022 FAX： 0755-23209033

2.2 设备动作流程
皮带或平台上料（人工或其它连线机台自动上料） 机械手 0#吸取 LCD+ COF 经修正 CCD 校正位置后
放置于 ACF 平台 ACF 平台前进，压头下降，贴付 ACF ACF 平台后退检测位置，检测 ACF 贴付效
果 机械手 1#吸取 LCD+ COF 放置于预压平台/同时 FPC 上料机吸取 FPC 预对位以后放置 FPC 于载台上，移
送到压头下方,压头吸取 FPC ，进行对位预压 机械手 2#吸取产品分别放置于本压的 4 个平台上进行本压
压合； 机械手 3#吸取本压好的产品放置于下游平台或流水线上

Full automatic FOG/FOB/FOF bonding line OL-FB1000

1. Equipment and company information
   1.1 Equipment name: Fully automatic FOG bonding machine
   1.2 Device model: FB-1000
   1.3 Applicable to 1″ -7″ LCD vertical screen products, automatic ACF attaching, alignment and hot pressing requirements for a single FPC on one side
   1.4 This equipment can be used in connection with our equipment

1.5 Company Name: Shenzhen Oulian Automation Equipment Co., Ltd.
1.6 Company Address: Building 62, Longwangmiao Industrial Zone, Fuyong, Baoan District, Shenzhen
1.7 TEL: 0755-23209022 FAX: 0755-23209033

2.2 Device action flow
Belt or platform feeding (manual or other connected machine automatic feeding) Manipulator 0# sucking LCD+ COF after correcting the position of CCD
Place on the ACF platform. The ACF platform advances, the indenter drops, and the ACF ACF platform retreats to the detection position to detect the ACF application effect
Fruit manipulator 1# sucks LCD+ COF and places it on the pre-compression platform/at the same time the FPC feeder sucks the FPC. After pre-alignment, place the FPC on the carrier and move it.
Send it to the bottom of the indenter, the indenter will suck FPC, and perform alignment pre-compression.
Pressing; Robot 3# absorbs the pressed product and places it on the downstream platform or assembly line

Full automatic EC cleaning machine OL-QX1000

全自动EC清洗机                     OL-QX1000

全自动 LCD EC 清洗机
1、设备信息
1.1 设备名称：全自动 LCD 端子清洗机
1.2 设备型号： QX-1000
1.3 通过皮带或平台传送 LCD、擦拭， 清洗（超声波选配） 和 plasma，可与本司设备连线使用

2.2 设备动作流程
员工工将 LCD 投放至平台/流水线 1#机械手将 LCD 搬运至 CCD 校正 1#机械手搬运至擦拭平台
擦拭平台 X 向搬运至清洗头进行清洗 擦拭完成 2#机械手吸取 LCD 搬运至 PLASMA 平台清洗 2#机
械手搬运 LCD 至出料工位 。

Fully automatic EC cleaning machine OL-QX1000

Fully automatic LCD EC cleaning machine

1. Equipment information
   1.1 Equipment name: Fully automatic LCD terminal cleaning machine
   1.2 Device model: QX-1000
   1.3 Transmission of LCD, wiping, cleaning (ultrasonic option) and plasma through belt or platform can be connected to our equipment

2.2 Device action flow
The employee puts the LCD on the platform/assembly line 1# robot moves the LCD to the CCD correction 1# robot moves to the wiping platform
Wipe the platform X-direction and move it to the cleaning head for cleaning. Wiping is completed. The 2# robot sucks the LCD and transports it to the PLASMA platform to clean the 2# machine.
The robot moves the LCD to the discharge station.

Full automatic COF punching machine OL-CC006

全自动COF冲裁机   OL-CC006

本设备为自动COF冲裁机，是将良品COF从料带上冲出来的设备。整卷料带由人工上料，冲裁和走位置由设备自动完成

技术参数：

设备特点：

1、设备由PLC控制动作，高精度伺服电机控制走带长度，位置精准；

2、设备冲裁部分采用模具设计，更换产品型号时，更换金型模具就可更换不同产品；

3、采用模具设计，冲切更平整，避免引脚变型和批锋；

4、离线和连线模式自由切换；

Full automatic COF punching machine OL-CC006

This equipment is an automatic COF punching machine, which punches out good COF from the material belt. The entire roll of material is loaded manually, and the punching and moving position are automatically completed by the equipment

technical parameter:

Applicable COF size:

30mm~80mm (The guide wheel and mold can be changed for different sizes);

Capacity:About 1200 pieces/hour (when connecting, the speed is determined by the downstream equipment);

Blanking accuracy:±0.1mm;

Blanking pressure:50N~1100N;

Product fixing method:Vacuum adsorption;

Air consumption:0.1 cubic meter per minute;

working pressure:0.4~0.6Mpa;

power supply:220V, 50HZ, 800W;

Total weight:250Kg;

Dimensions:L800W840H1310(720);

Features:

1. The equipment is controlled by PLC, and the high-precision servo motor controls the length of the tape, and the position is accurate;
2. The punching part of the equipment adopts mold design. When the product model is changed, different products can be replaced by changing the gold mold;
3. Using mold design, the punching is smoother, avoiding pin deformation and pinpointing;
4. Free switching between offline and online modes;

Full automatic bonding machine produce line photos:

full-automatic-bonding-machine-produce-line working videos:

Shenzhen Olian Automatic Equipment Co.,Ltd is a Professional LCD/LED/OLED bonding Machine Manufacturer. We do the Research&Develop&Design&Make&Sell the best and latest IC/COG/COB/COF/COP/FPC/FOG/FOB/FOF/TAB/OLB/ACF/ Bonding Machine/bonder and tools for TV/Mobilephone/Laptop/Watch/Touch and other Screens.We also offer all the bonding machine parts and all the accessories.