The OL-FPD005 by Olian Automatic is a single-station manual pulse pre-bonding machine. It is designed for COF (Chip-on-Flex) alignment and thermal pre-compression on panels up to 7 inches. The system supports both rigid glass and flexible displays.
This machine requires operators to perform all loading, alignment, and bonding steps manually. It provides precise thermal and pressure control during pre-bonding but does not include vision alignment or automatic motion.
The operator places the panel on the worktable. They press a vacuum button to secure it.
Next, they position the COF on the COF stage and align it roughly with the panel terminals. Vacuum holds the COF in place.
The operator then uses the display screen to fine-tune alignment visually.
After confirming alignment, they press the pre-bond button once—the left press head descends without heating to check contact.
Pressing the same button again lifts the head.
If alignment is acceptable, the operator presses two start buttons simultaneously with both hands. The head then lowers automatically, applies heat, and performs pulse pre-bonding.
When the set time ends, the system blows air to cool the bond area. The head retracts. The cycle is complete.
Finally, the operator removes the bonded panel manually.
All steps are manual except the controlled descent, heating, timing, cooling, and lift during the final bonding phase.
The left press head heats from room temperature to 400°C using pulse heating. Surface temperature uniformity is within ±8°C.
Heating time is adjustable from 0.1 to 99.9 seconds.
Bonding force ranges from 20 N to 300 N.
The standard press head size is 50 mm long × 0.8 mm thick, but custom sizes are available.
Only one operator is needed. All loading and unloading happen at the same position.
The machine includes a display screen for visual alignment reference.
It uses industrial-standard controls: Φ24 vacuum and start buttons, and a Φ22 emergency stop switch.
Core components include a 9.5 mm × 70 mm heating tube, a K-type thermocouple, and a custom hot press head.
Ideal for:
Note: This machine does not apply ACF, does not bond ICs, and has no automated vision system. ACF must be pre-laminated before use.
Olian Automatic offers a one-year warranty on parts and labor (excluding wear items).
On-site service is provided within 72 hours if remote support fails during warranty.
One day of training covers installation, operation, parameter setup, troubleshooting, and consumable replacement.
Lifetime technical support is available.
Model: OL-FPD005
Type: Manual Pulse Pre-Bonding Machine
Function: COF Pre-Bonding Only
Panel Size: Up to 7 inches
Substrates: Glass or Flexible Panels
Operation: Fully manual alignment; semi-automated thermal bonding
SEO Keywords:
Manual COF pre-bonding machine, OL-FPD005, Olian Automatic pulse bonder, 7-inch COF alignment press, hand-operated thermal pre-bonder, COF bonding for flexible display, single-station COF machine, pulse heating bonding system, manual LCD COF pre-compression, hot bar pre-bond equipment.
