1-7inch Dual station up and down alignment platform movable FOG bonding machine OL-F006

This device is a manual bonding machine, which is a device for aligning and bonding FPC on a panel that has already been attached with a conductive film (ACF). The lifting and positioning of the panel are manually completed, while bonding is automatically completed by the device.

This device meets the alignment and pre Main Bonding requirements of high accuracy FPC to TFT-LCD, OLED-LCD, ON-CELL, IN-CELL, and flexible OLED. It is mainly used for FPC repair and small-scale production.

1. Powerful, one machine can achieve pre Main Bonding for all cables. All existing products in the market can be produced.
2. The platform moves back and forth to separate the front and back positions of the bonding head and the pressing position, preventing beginners from burning the bonding head to their hands during production.
3. The size of the exterior can be reduced through the room doors of ordinary residential houses.
4. The upper and lower videos can be switched through the touch screen.
5. Single workstation design, flexible and compact.

LCD SIZE： 3~7inch
Capacity: 280~350 pieces／hour;
FPC Bonding range: 11~80mm;
Bonding accuracy: X±0.08mm,Y±0.08mm;
Heating method: Constant temperature control;
Temperature range: RT-400℃;
Working air pressure: 0.4~0.6Mpa;
Power Supply: 220V，50HZ，1600W;
Total weight: about 280Kg;
Dimensions: L900*W860*H1450