The OL-Q006 by Olian Automatic is a manual cleaning machine for LCD panel terminals. It prepares ITO bonding areas by removing contaminants before thermal bonding.
This unit combines lint-free cloth wiping and plasma cleaning to ensure high surface cleanliness. It is designed for panels with pre-applied anisotropic conductive film (ACF).
Suitable for rigid and flexible displays:
Panel size range:
The operator loads and unloads panels manually.
They initiate the cleaning cycle using control buttons.
No automatic alignment or robotic handling is included.
Worktable size: 170 mm (W) × 190 mm (D)
Lint-free roll: inner diameter >25 mm, outer diameter <200 mm
Vacuum system: yellow tubing, flow ≈36 L/min
Compressed air: 0.4–0.7 MPa, transparent Φ8 mm tubing, flow ≈120 L/min
Power supply: single-phase AC 220V, 50/60 Hz, 1500 W
Machine dimensions: 680 mm (W) × 850 mm (D) × 1350 mm (H)
Work height: 800 ± 30 mm
Net weight: ~161 kg
Frame color: beige
Other parts: chrome-plated or anodized
Core components:
Must be used in a cleanroom:
All hazardous zones are labeled with warning signs.
The machine is delivered clean and ready for installation.
This is a pre-bonding cleaning station only.
It does not perform:
Its sole purpose is terminal surface preparation.
Includes one-year warranty (excluding wear parts).
On-site service within 72 hours if remote support fails.
One-day training covers operation and basic maintenance.
Lifetime technical support is provided.
Model: OL-Q006
Function: LCD Terminal Cleaning Only
Methods: Lint-Free Wiping + Plasma Treatment
Operation: Fully Manual
Max Panel Size: 7 inches
SEO Keywords:
LCD terminal cleaner, OL-Q006, Olian Automatic plasma cleaning machine, manual ITO cleaning station, pre-bonding surface prep, lint-free wipe and plasma system, 7-inch display cleaning equipment, ACF-ready terminal cleaner, LCD panel pre-treatment machine, manual LCD cleaning workstation.
