OL-ADQX17 Automatic Dual-Platform LCD Terminal Cleaning Machine: Precision Cleaning for Display Manufacturing

In display manufacturing, cleaning ITO terminals before ACF attachment is a critical step. The OL-ADQX17 Automatic Dual-Platform LCD Terminal Cleaning Machine, engineered by Olian Automatic, delivers high-precision cleaning for LCD panels up to 17 inches.

This machine specializes in cleaning ITO terminals on rigid glass displays (TFT, IPS, OLED) using lint-free cloth and low-temperature plasma. The process combines manual loading with fully automated dual-platform cleaning and handling.

Why Choose the OL-ADQX17 Automatic Dual-Platform LCD Terminal Cleaning Machine?

The OL-ADQX17 Dual-Platform LCD Terminal Cleaning Machine is built for manufacturers who demand reliable pre-bonding surface preparation. Its innovative dual-platform design enables simultaneous two-side cleaning for maximum throughput.

• Dual-Platform Efficiency: Two independent platforms clean two sides simultaneously. This design significantly reduces cycle time compared to single-platform models.
• High Throughput: Production capacity reaches approximately 300-500 PCS/H for 7-10.1 inch panels. For 10.1-17 inch panels, capacity is 200-350 PCS/H.
• Fast Cleaning Speed: The cleaning head moves at speeds exceeding 150mm/s for efficient processing.
• Multi-Side Flexibility: Supports four cleaning modes for versatile product configurations. Clean S-L only, G-L only, G-L+S1-L, or G-L+S2-L.
• Micron-Level Precision: Platform repeat accuracy reaches ±0.005mm for consistent positioning.
• Exceptional Yield Rate: The stable cleaning process guarantees a product qualification rate of ≥98%.
• Versatile Compatibility: Handles LCD panels from 5 to 17 inches. Supports panel thickness from 0.2mm to 2.2mm.
• Quick Changeover: New product setup takes ≤30 minutes. Existing product changeover takes ≤15 minutes.
• Wide Product Support: Supports up to 100 different product varieties in memory.

Advanced Dual-Platform Cleaning Process & Plasma Technology

The OL-ADQX17 combines mechanical wiping with low-temperature plasma treatment for superior cleaning results. This dual-action approach ensures optimal surface preparation for ACF attachment.

Cleaning Modes:

1. Clean S-L side only
2. Clean G-L side only
3. Clean G-L + S1-L sides
4. Clean G-L + S2-L sides

The Optimized Workflow:

1. Loading: The operator places the LCD panel on the loading conveyor.
2. Auto Feeding: The conveyor automatically moves the panel to the positioning area.
3. Pickup: The loading robot arm picks the LCD and places it on the right cleaning platform.
4. Vision Correction: The platform moves to the correction position for first-side vision alignment.
5. First-Side Cleaning: The machine cleans the first ITO terminal side using alcohol and plasma.
6. Rotation: The dual platforms rotate to position the second side for cleaning.
7. Second-Side Cleaning: Vision correction and cleaning are performed on both platforms simultaneously.
8. Unloading: The unloading robot arm removes the cleaned LCD and places it on the output conveyor.

The cleaning solvent can be alcohol or acetone, selected based on process requirements. The cleaning quality is verified by a water contact angle of less than 20 degrees (before cleaning less than 50 degrees).

1-CCD Vision Alignment System

The OL-ADQX17 is equipped with an advanced 1-CCD camera vision system for precise alignment. The camera has 1.3MP resolution with coaxial LED lighting for optimal mark recognition. The system provides a field of view of 6.4 x 4.8mm with 1x magnification. A 13.3-inch display provides real-time monitoring for operators. This ensures accurate positioning for all cleaning operations.

Low-Temperature Plasma Cleaning Unit

The integrated plasma cleaning unit delivers consistent surface activation for superior ACF adhesion. The plasma generator operates at 100-300W output power for gentle yet effective cleaning. The high voltage range of 2KV to 7KV ensures thorough terminal treatment. The operating frequency of 18KHz to 60KHz provides flexible process control. Y-axis adjustment of ±3mm and Z-axis adjustment of ±15mm allow precise positioning for different panel configurations.

Intelligent Process Control

The OL-ADQX17 streamlines the cleaning process through sophisticated automation. The entire workflow is managed by a reliable Panasonic PLC and a user-friendly Weinview touch screen interface. The system supports both manual and automatic modes with real-time parameter display.

For security and quality control, the machine features a two-level password system. Engineers can set parameters while operators can only run the machine and switch products.

Robust Engineering & Reliable Support

Built for durability in cleanroom environments, the OL-ADQX17 features high-quality components from industry-leading brands.

Key Technical Specifications:

• LCD Panel Size: Max 17″ (380 x 240mm), Min 5″ (152 x 86mm), thickness 0.2~2.2mm
• Transport Method: 7~10.1″ two pieces; 10.1~17″ one piece
• Cleaning Method: Lint-free cloth + Plasma cleaning
• Max Wipe Depth: ≤5.5mm
• Cleaning Speed: Greater than 150mm/s
• Plasma Output: 100~300W (low-temperature plasma)
• Plasma High Voltage: 2KV~7KV
• Plasma Frequency: 18KHz~60KHz
• Cleaning Clamp Pressure: 0.1~0.4MPa
• Lint-Free Cloth Width: 10~20mm
• Platform Repeat Accuracy: ≤±0.005mm
• Platform Flatness: ≤±0.008mm/100mm
• Product Variety: Up to 100 products stored
• Equipment Failure Rate: ≤2%
• Power: 1Phase AC220V/50Hz/2500W
• Compressed Air: 0.4~0.7MPa, ~220L/min
• Vacuum: ~240L/min
• Dimensions: 1850mm (W) + 670mm conveyor x 1280mm (D) x 1850mm (H) + 200mm signal tower
• Weight: Approximately 686 kg
• Working Table Height: 1000±30mm

Component Brands:

• PLC: Panasonic (Japan)
• HMI: Weinview
• Solenoid Valves: CKD, Airtac, SMC
• Regulating Valves: SMC, Airtac
• Cylinders: SMC, Airtac
• Linear Guides: THK, Kuroda, HIWIN
• Servo Motors: Panasonic, Yaskawa
• Stepper Motors: Leadshine
• CCD System: Boshi
• Plasma Unit: PT300

ESD Compliance: The OL-ADQX17 meets strict ESD standards. All consumables and parts are anti-static. Panel surface static remains below ±100V during operation. Static dissipation reduces voltage from 1000V to 100V within 4 seconds. Ground impedance is ≤5Ω. ESD grounding is provided at all product handling points.

Safety Features: The machine includes interlock design with buzzer alarms and touch screen alerts. All high-temperature and mechanical hazard areas have warning labels. The EMO (emergency stop) cuts all power to servo drives. A buzzer and three-color signal tower provide visual and audible alerts.

Loading & Unloading: The machine supports conveyor-based loading and unloading. The output can connect to downstream equipment such as Panasonic TBX, FPX102CG, or FPX105CG systems. This flexibility allows seamless integration into existing production lines.

Cleaning Head Specifications:

• Quantity: 1 set
• Drive Method: Cylinder-driven
• Head Width: 20mm
• Cleaning Pressure: 0.1~0.4MPa, adjustable

Lint-Free Cloth Supply:

• Tension Control: Feed motor with tension adjustment
• Feed Amount: Minimum 1mm, freely adjustable
• Feed Control: Stepper motor with synchronous belt
• Waste Recovery: Collection reel

Plasma Unit Specifications:

• Power Output: 100~300W
• Y-Axis Adjustment: ±3mm via slide table
• Z-Axis Adjustment: ±15mm via clamp adjustment
• High Voltage: 2KV~7KV
• Frequency: 18KHz~60KHz

Why Choose Olian Automatic for Your LCD Cleaning Needs?

Olian Automatic is a trusted manufacturer of display assembly equipment headquartered in Shenzhen, China. With over two decades of experience, we serve display manufacturers worldwide. Our equipment is designed in ISO-certified facilities and shipped to over 30 countries across Asia, Europe, and North America. Visit our page for more information about our company. Explore our for complete manufacturing solutions.

Sustainability Commitment: The OL-ADQX17 is designed for energy efficiency. Its optimized cleaning system reduces solvent consumption. The machine also features low-noise operation and uses environmentally friendly materials in compliance with RoHS standards.

Warranty and Service: Olian Automatic provides a 1-year warranty with lifetime technical support for all equipment. We provide comprehensive on-site installation, debugging, and operator training to ensure your team can achieve optimal results from day one. For spare parts and service inquiries, please contact us at or visit our page.

FAQ:

Q: What is an LCD terminal cleaning machine used for?
A: An LCD terminal cleaning machine cleans ITO terminals on display panels before ACF attachment.

Q: What cleaning methods does the OL-ADQX17 use?
A: The OL-ADQX17 uses lint-free cloth wiping combined with low-temperature plasma cleaning.

Q: What panel sizes can the OL-ADQX17 handle?
A: The OL-ADQX17 handles LCD panels from 5 to 17 inches with thickness from 0.2mm to 2.2mm.

Q: What is the production capacity of the OL-ADQX17?
A: Capacity is 300-500 PCS/H for 7-10.1 inch panels and 200-350 PCS/H for 10.1-17 inch panels.

Q: What cleaning quality standard does the OL-ADQX17 meet?
A: The water contact angle after cleaning is less than 20 degrees (before cleaning less than 50 degrees).

Q: How long is the warranty period?
A: Olian Automatic provides a 1-year warranty with lifetime technical support for all equipment.

Q: How long does product changeover take?
A: New product setup takes ≤30 minutes. Existing product changeover takes ≤15 minutes.

Q: What is the difference between the OL-ADQX17 and single-platform models?
A: The OL-ADQX17 features dual platforms that clean two sides simultaneously, reducing cycle time significantly.

Upgrade your display assembly line with the OL-ADQX17, the Automatic Dual-Platform LCD Terminal Cleaning Machine that combines precision, speed, and reliability.

---

Product Tags

Automatic Dual-Platform LCD Terminal Cleaning Machine, LCD Terminal Cleaning Machine, ITO Terminal Cleaning Machine, Plasma Cleaning Machine, Multi-Side LCD Cleaning, LCD Display Cleaning Equipment, Olian Automatic, ITO Cleaner, LCD Pre-Bonding Machine, Display Manufacturing, ACF Preparation Equipment, 17 inch LCD Cleaner, Semi-Automatic Cleaning Machine, LCD Terminal Washer, FOG Preparation Machine, Display Assembly Equipment, Low-Temperature Plasma Cleaner